ERM8-075-05.0-S-DV-K-TR Datasheet, PDF (1/4 Pages) Samtec, Inc – RECOMMENDED PCB LAYOUT

REVISION J
RECOMMENDED PCB LAYOUT FOR ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
NOTES:
1. CONNECTOR ENVELOPE DIMENSIONS. OTHER COMPONENTS
PLACED ON PCB SHALL AVOID THIS ZONE.
J
2. THESE PLATED THROUGH HOLES AND STENCIL APERTURES
NOT REQUIRED FOR ERM8-010-09.0-X-DV-EGPS.
CONNECTOR OUTLINE
CONNECTOR OUTLINE
(-L AND -EGP OPTIONS ONLY)
4.90 .193
CL
1.50 .059
(2 PLCS)
0.83 .033
PTH (2 PLCS)
(-L AND -EGP OPTIONS ONLY)
TO BE SOLDERED USING
PASTE-IN-HOLE TECHNOLOGY
1.45 .057
NPTH (2 PLCS)
"C"
"B"
"A"
0.800 .031 (TYP)
(TOL. NON-ACCUM)
PIN 1
CL
PIN 59
4.90 .193 (TYP) REF
(-L AND -EGP OPTIONS ONLY)
'A'
3.40 .134
(TYP) REF
PIN 2
PIN 60
0.500 .0197
(TYP)
1.10 .043
(TYP)
5.60 .220
REF
CONNECTOR OUTLINE
FIG 1
ALL OPTIONS EXCEPT - EGPS
(-030 POSITION SHOWN)
(ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE)
F:\DWG\MISC\Mktg\Footprnt\ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DETAIL 'A'
SCALE 6 : 1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
SHEET 1 OF 4