ERF8-060-05.0-S-DV-K-TR Datasheet, PDF (1/6 Pages) Samtec, Inc – 0.8MM EDGE RATE SOCKET ASSEMBLY

REVISION AF
DO NOT
SCALE FROM
THIS PRINT
59
3.36 .132
REF
60
3.35 .132
REF
"E" REF
1.10 .043
REF
DETAIL 'D'
SCALE 4 : 1
1.32 .052
REF
C
"A" REF
(SEE SHT 2, TABLE 4)
"B" REF
(SEE SHT 2, TABLE 4)
POSITION #1
INDICATOR
C
0.800 .0315 (TYP)
(TOL. NON-ACCUM)
C
"C" (SEE SHT 2, TABLE 4)
ERF8-XXX-XX.X-DV-01
"A"
(SEE TABLE 3)
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
ERF8-XXX-XX.X-X-DV-XXXX-TR
No OF POSITIONS
TAPE & REEL
(PER ROW)
(STANDARD PACKAGING)
-005, -010, -011, -013, -020, -023, -025,
(NOT AVAILABLE IN 100 POS)
-030, -035, -040, -049, -050, -060,
(SEE NOTE 4 & 7)
-070, -075,-100
AF (-100 POSITION AVAILABLE IN -05.0 ONLY
SEE NOTE 9)
01
LEAD STYLE
-05.0 = 5mm
-07.0 = 7mm
**-10.0 = 10mm
5.60 .220
REF
02
PLATING SPECIFICATION
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE C-211-XX.X-L)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE C-211-XX.X-S)
OPTION
-K: POLYIMIDE FILM PAD (SEE FIG 2)
-L: LATCHES (-05.0 LEAD STYLE ONLY,
SEE NOTE 5, SEE FIG 5)
-EGP: EXTENDED GUIDE POST
(SEE NOTE 6, SEE FIG 3)
-EGPS: EXTENDED GUIDE POST SHIELD
(ONLY AVAILABLE IN ***-10.0
LEAD STYLE AND ONLY -10, -20,
-25 & -30 POSITIONS SEE FIG 6)
*** -L2: LATCH WITH LONG WELD TAB
(-05.0 & -07.0 LEAD STYLE ONLY,
SEE FIG 5)
*** -E: EXTENDED GUIDE POST WITH LONG
WELD TAB, SEE FIG 3)
ROW SPECIFICATION
*** -W: WELD TAB (-05.0 & -07.0 LEAD STYLE
ONLY, SEE FIG 10)
-DV: DOUBLE VERTICAL
** = NOT TOOLED
*** = NOT RELEASED FOR PRODUCTION
1.32 .052 REF
"A"
C _"C"
(SEE SHT 2, TABLE 4)
3 MAX SWAY
(TYP)
0.23 .009
CL
REF
0.800 .0315 (TYP)
(TOL NON-ACCUM)
C
"D" REF (SEE SHT 2, TABLE 4)
5.40 .213 REF
2.58±0.12 .101±.005
C
1.24 .049 REF
0.50 [.020] x 45 REF
"N"
(REF)
C-211-XX.X-X
(SEE TABLE 3)
'D'
1.04 .041 REF
(2 PLCS)
CL
1.50 .059
REF
C
"F"(TYP)
(SEE SHT 2, TABLE 5)
CL
5.41±0.25 .213±.010
C
SEE TABLE 1
C
0.90 .036 REF
SECTION "A"-"A"
SCALE 5 : 1
NOTES:
1. ^C REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: 2.22 N [.5 LB.]
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR EIA-481-D
REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER,
TRAILOR WILL BE SUPPLIED.
5. NOT AVAILABLE WITH -EGP, -E, -W, -L2 OR -EGPS OPTIONS.
6. OPTION ONLY AVAILABLE ON -07.0 LEAD STYLE.
7. -TR PACKAGING NOT AVAILABLE ON 100 POSITION ONLY AVAILABLE IN TRAYS.
8. NOTE DELETED.
AF 9. NOT AVAILABLE WITH -L, -L2, -E, OR -W OPTIONS.
FIG 1
(ERF8-030-05.0-X-DV-XX SHOWN)
(CENTER FEATURES REMOVED FOR CLARITY)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS
ANGLES
X.X: 0.3 [.01]
2
X.XX: 0.13 [.005]
X.XXX: 0.050 [.0020]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
INSULATOR: LCP, COLOR: BLACK
CONTACT & LATCHES: BeCu
SHIELD: PHOS BRONZE
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
0.8MM EDGE RATE SOCKET ASSEMBLY
DWG. NO.
ERF8-XXX-XX.X-X-DV-XXXX-TR
F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW
BY: KNOWLDEN 9/26/2005 SHEET 1 OF 6