BTE-020-01-L-D-A-K Datasheet, PDF (1/3 Pages) Samtec, Inc – .8mm DOUBLE ROW TERMINAL ASSEMBLY

REVISION AX
DO NOT
SCALE FROM
THIS PRINT
BTE-XXX-XX-X-D-XX
No OF POSITIONS
-020, -040, -060,
[-080, *-090, -100, -120]
(PER ROW)
*-03, -04 & -08 BODY STYLE ONLY
OPTION
-A: ALIGNMENT PINS
(USE BTE-XXX-XX-D-A)
-LC: LOCKING CLIPS(SEE NOTE 13)
(USE LC-08-TM-01)
-K: POLYIMIDE FILM
C
((No OF POSITIONS x .0315[.800]) +.1575[4.000]) REF
.0945 2.400
((No OF POSITIONS -1) x .0315[.800]) .003[.08]
01
BODY STYLE
-01: .1680[4.267]
-02: .2861[7.264]
-03: .4042[10.266]
-04: .6010[15.265]
-05: .7190[18.263]
-06: .8370[21.260]
-07: .9542 [24.237]
(N/A ON STYLES -07 & -08)
(USE K-DOT-.276-.375-.005, SEE FIG 2)
-TR: TAPE & REEL (80 POS MAX)
[N/A ON STYLE -05, -06, -07 & -08]
-FL: FRICTION LOCK (SEE FIG 4, SHEET 3)
(USE BTE-XXX-01-D-X-FL)
(AVAIL ON LEAD STYLE -01 ONLY,
-020 THRU -100 POSITIONS ONLY)
.2350 5.969
REF
-08: 1.1511[29.238]
-09: .5224 [13.269]
ROW SPECIFICATION
-D: DOUBLE (USE BTE-XXX-XX-D-X
.1550 3.937 REF
02
PLATING SPECIFICATION
& BTEH-XXX-XX-D-X)
(SEE NOTE 14)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA, WITH MATTE TIN TAILS
(USE T-1SXX-XX-F) (SEE NOTE 10)
.0080 0.203 REF
FIG 1
BTE-060-01-X-D-LC SHOWN
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN TAILS
(USE T-1SXX-XX-L) (SEE NOTE 10)
-H: 30µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL (USE T-1SXX-XX-H)
-C: 50µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL (USE T-1SXX-XX-C)
C _{.055 1.397}
"A"
BTE-XXX-XX-D
C _{.155±.003 3.94±0.076}
T-1S39-XX-X
"B"
.003[.08]
.001[.03]
C
(SEE NOTE 8)
LC-08-TM-01 _"A"
.010 0.254 REF
(-LC WIDTH)
"A"
2 MAX SWAY
(ANY DIRECTION)
SEE TABLE 2
C
.027 0.69 REF
.0375 0.953
.280 7.11 REF
((No OF POSITIONS x .0315[.800]) + .0975[2.477]) .003[.08]
BTE-XXX-XX-D-A
-LC: LOCKING CLIP OPTION
SECTION "A"-"A"
.0375 0.952 REF
.0375 0.953 REF
.0350 0.889 DIA REF
NOTES:
((No OF POSITIONS x .0315[.800]) + .0975[2.477]) REF
1. ^C REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. BURR ALLOWANCE: .0015[.038] MAX.
4. NOTE DELETED.
-A: ALIGNMENT PIN OPTION
5. MINIMUM PUSHOUT FORCE: 6 OZ.
6. NOTE DELETED.
7. PARTS TO BE MOLD TO POSITION.
8. MAX VARIANCE OF .002[.05].
9. BTE-XXX-03-D BODY CAN BE SUBSTITUTED FOR BTE-XXX-03-D-A.
10. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
11. NOTE DELETED.
12. NOTE DELETED.
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT COMPATIBLE
WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES
WITH THE –LC OPTION."
14. PIN CAN EXTEND PAST WALL .003 [.08] MAX.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
INSULATOR: LCP, COLOR: BLACK, FLAMMABILITY RATING: UL94VO
TERMINAL: PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
.8mm DOUBLE ROW TERMINAL ASSEMBLY
DWG. NO. _{BTE-XXX-XX-X-D-XX}
F:\DWG\MISC\MKTG\BTE-XXX-XX-X-D-XX-MKT.SLDDRW
BY: DEAN P 03/22/1999 SHEET 1 OF 3