BSE-020-01-F-D-A Datasheet, PDF (1/1 Pages) Samtec, Inc – .8mm DOUBLE ROW SOCKET ASSEMBLY

REVISION AC
DO NOT
SCALE FROM
THIS PRINT
.1195 3.035 REF
.2450 6.223 REF
.0200 0.508 REF
C
.0550 1.397
.0100 0.254 REF
.0375 0.953 REF
FIG 1
BSE-060-01-X-D-LC SHOWN
BSE-XXX-01-X-D-XX
(No OF POSITIONS x.0315[.80]) + .2075[5.27] REF
C
(No OF POSITIONS -1) x .0315[.80]
02
01
.0283 0.718
"A"
BSE-XXX-01-D
No OF POSITIONS
-020, -040, -060,
-080, -090, -100, -120
.2850 7.239
(PER ROW)
REF
LEAD STYLE
-01: .1280 [3.25]
OPTION
-A: ALIGNMENT PINS
(USE BSE-XXX-01-D-A)
-LC: LOCKING CLIPS
(USE LC-08-TM-01)
-TR: TAPE & REEL (80 POS. MAX)
-FL: FRICTION LOCK (SEE FIG 2)
(-020 THRU -100 POSITIONS ONLY)
(USE BSE-XXX-01-D-X-FL)
.1500 3.810 REF
PLATING SPECIFICATION
ROW SPECIFICATION
-D: DOUBLE (USE BSE-XXX-01-D-X)
-F: FLASH SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 6 & 9)
-L: LIGHT SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 9)
-H: HEAVY GOLD WITH MATTE TIN TAILS (SEE NOTE 9)
-C: ELECTRO-POLISHED SELECTIVE (SEE NOTE 9)
.1200 3.048 REF
.165^{+- ..000051} 4.19^{+- 00..1033}
C
C-126-21-X
(SEE NOTE 9)
C
.006 0.147 REF
.1280^{+- ..00003100} 3.251^{+- 00..0083} _C
(SEE NOTE 7)
SEE TABLE 1
"A"
.0060 0.152 REF
-LC: LOCKING CLIP OPTION SHOWN
LC-08-TM-01
2 MAX TOE (TYP)
.064 1.622 REF
.2950 7.493 REF
SECTION "A"-"A"
BSE-XXX-01-D-A
"B"
(No OF POS X .0315[.80])+ .167[4.21] REF
(FL TO FL DIMENSION)
"B"
R
.0375 0.953 REF
.0350 0.889 REF
(No OF POSITIONS X .0315[.80]) + .1625[4.13] REF
-A: ALIGNMENT PIN OPTION SHOWN
BSE-060-01-X-D-A SHOWN
BSE-XXX-01-D-X-FL
.080 2.03 REF
NOTES:
1. ^C REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. MAXIMUM BURR ALLOWANCE: .0015 [.038].
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. NOTE DELETED.
6. –L PLATING MAY BE SUBSTITUTED FOR –F PLATING.
7. MAX VARIENCE: .002 [.05]
8. NOTE DELETED.
9. -90 THROUGH -120 POSITION PARTS USE C-269-11-X. DO
NOT SUB C-126-XX-X OR C-224-01-X.
10. POSITIONS 20, 40, 60, 80, 120 ARE TRAY PACKAGED.
PACKAGING VIEW
90 & 100 POS ONLY
TUBE: PT-1-24-03-78
PLUG: TP-09
SECTION "B"-"B"
SCALE 2 : 1
FIG 2
-FL OPTION
BSE-020-01-X-D-A-FL SHOWN
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.25]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
INSULATOR: BLACK LCP
FLAMMABILITY RATING: UL94VO
SOCKET:PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
.8mm DOUBLE ROW SOCKET ASSEMBLY
DWG. NO. _{BSE-XXX-01-X-D-XX}
F:\DWG\MISC\MKTG\BSE-XXX-01-X-D-XX-MKT.SLDDRW
BY: DEAN P 05/24/1999 SHEET 1 OF 1