BNC7T-P-C-XX-ST-CA6 Datasheet, PDF (1/3 Pages) Samtec, Inc – DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES]

REVISION D
DO NOT
SCALE FROM
THIS PRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
SUB-BNC7T-P-C-XX-ST-CA6
BNC7T-P-C-X-ST-CA6-PIN
BNC-FER-001-X
BNC7T-P-C-XX-ST-CA6
GENDER
-P: PLUG
TYPE
-C: CABLE
TERMINATION
-CA6: RG-6 CABLE
ORIENTATION
-ST: STRAIGHT
PLATING SPECIFICATION
-MN: MEDIUM GOLD/NICKEL (SEE NOTES 7 & 8)
(SUB-BNC7T-P-C-N-ST-CA6)
(BNC7-P-C-M-ST-CA6-PIN)
(BNC-FER-001-N)
FIG.1
BNC7T-P-C-XX-ST-CA6 SHOWN
RECOMMENDED CABLE STRIPPING
3.2 .13
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. PUSHOUT FORCE FOR CENTER CONTACT: 26.69 N [6.0 LB] MIN.
3. SEE SHEET 3 FOR TERMINATION INFORMATION.
D 4. NOTE DELETED.
D ^{5. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.}
6. RoHs COMPLIANT.
7. COMPONENT PLATING DESIGNATIONS:
-M: .000010" MIN. GOLD OVER .000050" MIN. NICKEL.
-N: .000100" MIN. NICKEL.
8. ASSEMBLY PLATING DESIGNATIONS:
-MN: (CENTER CONTACT)-M:
(OUTER CONTACT)-N:
(REMAINING METAL PARTS)-N:
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
5.4 .21
11.9 .47
F:\DWG\MISC\MKTG\BNC7T-P-C-XX-ST-CA6-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS [INCHES]
TOLERANCES ARE:
DECIMALS
ANGLES
.X: 0.3 [.01]
2
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
SHELL, FERRULE, NUT: BRASS
CONTACT: BRASS
DIELECTRIC: PTFE
GASKET: SILICONE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
TRUE 75 OHM BNC STRAIGHT PLUG RG-6 D
DWG. NO.
BNC7T-P-C-XX-ST-CA6
BY: G. HERMAN 09/29/2008 SHEET 1 OF 3