ASP-149117-01 Datasheet, PDF (1/2 Pages) Samtec, Inc – THIS PRODUCT MANUFACTURED WITH LEAD-FREE PROCESSING

ASP-149117-01
CL
REVISION
45
4
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
15.05 .593
REF
3
20.80 .819 ₄
REF
23.95 .943 REF
NOT RELEASED
FOR PRODUCTION
USE FOR QUOTING, PRELIMINARY
DESIGN, PROTOTYPING AND
INFORMATIONAL PURPOSES ONLY
15
4
C ^C1-B,I-OG
0.635 .0250 (TYP)
(TOL. NON-ACCUM) ₀₁
1.68 .066 REF
13.34 .525
REF
1.10 .043 REF
0.50 .020 REF
8.75 .344
REF
1.32 .052
'D'
1
22.95 .904 REF
21.59 .850
C C2-B,I-OG
4
"A"
CL
"A"
1.32 .052 REF
19.50 .768
C _C3-B-MV
2
20.44±0.08 .805±.003
(SEE NOTE 10)
4 _C C14-B,I-OG
35
ROW A
ROW B
ROW C
ROW D
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 2.22N[0.5 LB].
3. INSPECT DIMENSION AT BOTH ENDS OF PART. ALL VISIBLE SOLDER CRIMPS TO BE CHECKED.
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
5. PARTS TO BE PACKAGED IN TAPE AND REEL.
6. ATTACH LABEL "ASP-149117-01" TO EACH TAPE & REEL PACKAGE.
7. MEASUREMENT MUST BE TAKEN FROM THE LOWEST POINT OF THIS SURFACE (STANDOFF).
C C11-B,I-XR 8. SOLDER COMPOSITION; 96.5% TIN/3.5% SILVER.
4
9. MEASUREMENT MUST BE TAKEN TO BACK CAP.
10. CHECK DIMENSION AT FIRST AND LAST ROW OF TAILS.
ITEM NO.
PART NUMBER
QUANTITY
MATERIAL
1
SUB-IM-C-299-01-S
18.000
PHOS BRONZE, 521 HARD TEMPER
'B'
2
SUB-IM-C-299-02-S
17.000
PHOS BRONZE, 521 HARD TEMPER
3
HT3-035-01-RA
1.0000
VECTRA E130i, COLOR: BLACK
4
WT-61-01-T
2.0000
PHOS BRONZE, 510 1/2 HARD
ROW D
4
5
HT3-BC-035-01
1.0000
VECTRA E130i, COLOR: BLACK
ROW C
ROW B
ROW A
CPC
FREQUENCY
THIS SHEET
A
B
C1, C2, C3,
C11, C14
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS[INCHES].
TOLERANCES ARE:
DECIMALS
ANGLES
X.X: 0.3[.01]
2
X.XX: 0.13[.005]
X.XXX: 0.051[.0020]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: LCP
C
CONTACT: PHOS BRONZE
WT: PHOS BRONZE
4^D
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000200 REF TIN OVER .000050 NICKEL
F:\DWG\SW\Newprod\Pt635mm\HyperTransport\ASP-149117-01.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
4 ROW 0.635mm SOCKET
DWG. NO. _{ASP-149117-01}
BY: VICKY Z
12/10/2009 SHEET 1 OF 2