ASP-129646-01 Datasheet, PDF (1/2 Pages) Samtec, Inc – NOT AVAILABLE AS STANDARD

REVISION B
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. NOT AVAILABLE AS STANDARD.
2. C REPRESENTS A CRITICAL DIMENSION.
3. BURR ALLOWANCE: .0015[0.038] MAX.
4. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB.
5. MAX VARIANCE OF .002[0.05].
6. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.
7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE CONTACT.
8. PARTS TO BE PACKAGED IN TRAYS.
C1
.880 22.35 REF
(((26 POS / 26) x .840[21.34]) + .040[1.02])
.0825 2.096
REF
C2
4
02
.320 8.13
REF
CL
.173±.020 4.38±0.51
1
.009 0.23
REF
.535 13.59 REF
.625 15.88
25 EQ SPACES @ .0250[.635]
"A"
.275 6.99
REF
01
.356 9.04
REF
.451 11.46
.035 0.89
REF
ITEM NO.
PART NUMBER QUANTITY
MATERIAL
1
QFSS-26-06.25-D-01-A 1.0000
VECTRA E130i, COLOR: BLACK
2
C-223-06.25-S
52.000 PHOS BRONZE, 521 EXTRA SPRING TEMPER
3
T-1G28-06.25-L
1.0000 PHOS BRONZE, 510 FULL HARD TEMPER
4
PPP-51
1.0000
46HF5040, COLOR: BLACK
5
TY-QFS012-026-6.25 1.0000
BLACK HIPS
"A"
.686 17.42 REF
.810 20.57 REF
.040 1.02 REF
(TYP)
NON STANDARD
COMPONENT
ASSEMBLY
X
TOOLING
PROCESS
PACKAGING
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.3]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000200 REF TIN OVER .000050 NICKEL
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
ELEVATED QFS
DWG. NO. _{ASP-129646-01}
OTHER
C:\EnterpriseVault\DWG\MISC\MKTG\ASP-129646-01-MKT.SLDDRW
BY: CLAY W
12/13/2006 SHEET 1 OF 2