ASP-122953-01 Datasheet, PDF (1/1 Pages) Samtec, Inc – BANK 1 IS DIFFERENTIAL PAIR, BANK 2 & 3 ARE SINGLE ENDED.

REVISION G
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. BANK 1 IS DIFFERENTIAL PAIR, BANK 2 & 3 ARE SINGLE ENDED.
2. C REPRESENTS A CRITICAL DIMENSION.
3. MINIMUM GROUND PLANE & CONTACT RETENTION: 8 OZ.
4. MAXIMUM BURR ALLOWANCE: .0015.
5. MAXIMUM HEIGHT VARIANCE OF .002 APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. GROUND PLANE PRESS HEIGHT MUST BE .003 LESS THAN THE MAX HEIGHT
OR .002 GREATER THAN THE MINIMUM HEIGHT OF SIGNAL PIN.
7. PARTS TO BE PACKAGED IN TRAYS.
.1107
.551
.028(9 PLCS)
2.368
.571(2 PLCS)
.0197(TYP)
.0895(TYP)
.105 _{.068 (TYP)}
.011(TYP)
.236
.250(TYP)
.153(2 PLCS)
.217
.1925(TYP)
FOOT PRINT
.78 REF
.571
(29 EQ SPACES
02
@ .0197)
2.413
((90 POS / 30 x .7875) + .050)
ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT
.040
.017 (TYP)
.100(TYP)
(2 PLCS PER BANK)
.185(TYP)
(2 PLCS PER BANK)
.150 REF
.245 REF .285 REF
01
.036 REF
.038
REF
DP BANK
.035 REF
.626 REF
.006 REF
"A"
.725 REF
"A"
3
2.368 REF
((90 POS/30) x .7875) + .005
1
.120 REF
2
.006
C1
.128^+- _..000013
.070 REF
.007
.2950 REF
.038 REF
SECTION "A"-"A"
SCALE 2 : 1
ITEM NO.
1
2
3
4
PART NUMBER
QSH-30-01-D-03-A
C-126-21-F
T-1G2-01-F
TRAY-QXX008-PR-01-AP-T-A
QUANTITY
1.0000
160.00
3.0000
1.0000
MATERIAL
VECTRA E130i, COLOR: BLACK
PHOS BRONZE, 510 SPRING TEMPER
PHOS BRONZE, 510 HALF HARD TEMPER
ANTI-STATIC BLACK HIPS
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.3]
2
.XXX: .005[.13]
.XXXX: .0020[.051]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
GROUND PLANE & CONTACT PLATING:
CONTACT AREA: .000003 GOLD OVER .000050 NICKEL
SHEET SCALE: 3:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail: [e-mail]
code: 55322
DESCRIPTION:
.5MM DBL HS/DP SOCKET ASSEMBLY
DWG. NO. _{ASP-122953-01}
c:\enterprisevault\DWG\MISC\MKTG\ASP-122953-01-MKT.SLDDRW
BY: RRC
1/13/06
SHEET 1 OF 1