ASP-103612-02 Datasheet, PDF (1/2 Pages) Samtec, Inc – VITA 42 (LEAD FREE) SOCKET ASSEMBLY

REVISION H
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION.
2. C REPRESENTS A CRITICAL DIMENSION.
3. BURR ALLOWANCE: .0005[0.013] MAX.
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. MAXIMUM ALLOWABLE BOW: .002[0.05] INCH/INCH AFTER ASSEMBLY.
6. CONTACT TO BE FLUSH ±.002[0.05].
7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL).
8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN ±.001[0.03].
9. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025[0.064]
10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS.
11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE
CENTER OF ANY ADJACENT INNER PEG SHALL BE .025±.005[0.64±0.13].
12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY`S LESS THAN 125 PCS,
NO TRAILER OR LEADER WILL BE SUPPLIED.
13. LEAD FREE SOLDER BALLS.
ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT
1.732 44.00
REF
1.070 27.18 REF
.970 24.64 REF
C1 _{.900±.002 22.86±0.05}
(19 POS - 1) x .0500[1.270]
19
01
.630 16.00
REF
A
B
USER DIRECTION OF UN-REELING
C .145 3.68
D REF
.250 6.35
.320 8.13
REF
POCKET NOT DETAILED
5
E
F
PACKAGING VIEW
.095 2.41
REF
.035 0.89 REF
.354 8.99
.017±.010 0.43±0.25
.139 3.54
ITEM NO.
1
2
3
4
5
PART NUMBER
ASP-103597-01-B
C-140-03-H
SDB-030-9653
K-850-650
CT-ASP1132MS
QUANTITY
1.0000
114.00
114.00
1.0000
1.0000
.309±.020 7.85±0.51 .134±.003 3.41±0.08
"A"
"A"
.012 0.31
(SEE NOTE 9)
MATERIAL
UL 94 V0, COLOR: BLACK
PHOS BRONZE, 521 HARD TEMPER
96.5% Sn/3% Ag/.5% Cu
POLYIMIDE FILM
CONDUCTIVE POLYMER
.104 2.64 REF
4
2
1
SECTION "A"-"A" ³
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01
2
.XXX: .005
.XXXX: .0020
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: [phone] FAX: [phone]
e-Mail [e-mail] code 55322
DESCRIPTION:
VITA 42 (LEAD FREE) SOCKET ASSEMBLY
DWG. NO. _{ASP-103612-02}
F:\DWG\MISC\MKTG\ASP-103612-02-MKT.SLDDRW
BY: WHELAN 09/12/06 SHEET 1 OF 2