RC1608J515CS Datasheet, PDF (23/40 Pages) Samsung semiconductor – We, Samsung, declare that our component Chip Resistor is produced in accordance with EU RoHS directive.

Specification
Type
Power
Rating
(W)
Working
Voltage
(Vr)
Tolerance
(%)
Resistance
Range ( )
T.C.R
(ppm/ )
Rated
Ambient
Temperature
RUK1608
1/3
(0.33)
RUK2012
1/2
(0.50)
RUK3216
1
(1.0)
(P R)
F: 1
J: 5
10m~30m
100
70
RUK3225
1
(1.0)
1
RUK5025
(1.0)
1
RUK6432
(1.0)
Working voltage = Rated voltage(Vr)=(P R) (P:Rated Power, R:Norminal Resistance)
Please contact our sales representatives or product engineers for lower T.C.R or higher rated power products.
Power Derating Curve
Marking
Rated
Working
Temperature
-55 ~+155
The rated power is the maximum continuous loading
power at 70 ambient temperature.
For ambient temperature above 70 , the loading power
follows the below power derating curve.
100
80
60
Operation area
40
4 digits indication
(E-24 series)
- R means decimal point.
- Other digits represent
significant value.
- Example: R010
Left 1 digit: R
Last 3 digits:010
R010 = 0.010 = 10m
20
-55
0
-30
70
155
0 30 60 90 120 150
Ambient Temperature( )
Performance Characteristics
Item
Resistance
T.C.R
Overload(Short time)
Overload(Intermittent)
Resistance to solder Heat
Moisture Resistance
Endurance at 70
Bending strength
Requirement dR%
within specified tolerance
within specified T.C.R
±(1.0%+0.0005 )
±(3.0%+0.0005 )
±(1.0%+0.0005 )
±(3.0%+0.0005 )
±(3.0%+0.0005 )
±(1.0%+0.0005 )
Test Method
at 25 . Kelvin Probing Method.
20 /-55 & 20 /+125
Rated Voltage 2.5 for 5sec.
Rated Voltage 2.5
1sec on, 25sec off 10,000cycies.
260 ±5
±1sec
40 , 95%RH, 1,000hr, 1.5hr On/0.5hr off cycle
70 , 1,000hr, 1.5hr On/0.5hr off cycle
60mm/min speed, Press until 3mm, keep 5sec
Operation
Notes
Example of land
Pattern Design
Recommended
Soldering Conditions
General Structure
General
Precision
Jumper
Low ohms
(RC Series)
Low ohms
(RUT Series)
Ultra Low Ohms
(RU Series)
Ultra Low Ohms
(RUW Series)
Ultra Low Ohms
(RUK Series)
Arrays
(CONVEX Type)
Arrays
(CONCAVE Type)
Arrays
(FLAT Type)
Arrays for
Memory Modules
Attenuator
Characteristics
Performance
Packaging
Standard
Resistance Value
The specifications and designs contained herein may be subject to change without notice.
Please contact our sales representatives or product engineers before order.
22
23