K8P2815UQC Datasheet, PDF (21/62 Pages) Samsung semiconductor – 128Mb C-die NOR FLASH

K8P2815UQC
datasheet
Rev. 1.0
FLASH MEMORY
START
COUNT = 1
RESET=VID
Wait 4μs
First Write
Cycle=60h?
No _{Temporary Block Group}
Unprotect Mode
Yes
Yes Block Group
Protection ?
Block Protect
Algorithm
Set up Block Group
address
Block Group Protect:
Write 60H to Block
Group address with
A6=0,A1=1
A0=0
Wait 120μs
Increment
COUNT
Verify Block Group
Protect:Write 40H to
Block Group address
with A6=0,
A1=1,A0=0
Read from
Block Group address
with A6=0,
A1=1,A0=0
No
COUNT
=25?
No
Data=01h?
No
Block Unprotect
No _{All Block Groups} Yes _{Block Group <i>, i= 0}
Protected ?
Algorithm
Block Group Unprotect
Write 60H
with
A6=1,A1=1
A0=0
Reset
COUNT=1
Increment
COUNT
Wait 3ms
Verify Block Group
Unprotect:Write 40H to
Block Group address
with A6=1,
A1=1,A0=0
Read from
Block Group address
with A6=1,
A1=1,A0=0
Set up next Block
No
Group address
COUNT
=1000?
No
Data=00h?
Yes
Device failed
Yes
Protect another
Block Group? _Yes
No
Remove VID
from RESET
Write RESET
command
END
Yes
Device failed
Yes
Last Block Group ^No
verified ?
Yes
Remove VID
from RESET
Write RESET
command
END
NOTE : All blocks must be protected before unprotect operation is executing.
Figure 7: Block Group Protection & Unprotection Algorithms
- 21 -