|
KC73129UCA Datasheet, PDF (20/20 Pages) Samsung semiconductor – 1/3 INCH CCD IMAGE SENSOR FOR PAL CAMERA | |||
|
◁ |
1/3 INCH CCD IMAGE SENSOR FOR PAL CAMERA
KC73129UCA
HANDLING INSTRUCTIONS
⢠Static Charge Prevention
CCD image sensors can be easily damaged by static discharge. Before handling, be sure to take the following
protective measures.
â Use non chargeable gloves, clothes or material. Also use conductive shoes.
â When handling directly, use an earth band.
â Install a conductive mat on the floor or working table to prevent generation of static electricity.
â Ionized air is recommended for discharging when handling CCD image sensor.
â For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
⢠Soldering
â Make sure the package temperature does not exceed 80 °C.
â Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and and remount, cool sufficiently.
â To dismount an imaging device, do not use a solder suction equipment. When using an electronic
disoldering tool, use a thermal controller of the zero cross on/off type and connect to ground.
⢠Dust and Dirt Protection
â Operate in the clean environments (around class 1000 will be appropriate).
â Do not either touch glass plates by hand or have object come in contact with glass surface. Should dirt
stick to a glass surface blow it off with an air blow(for dirt stuck through static electricity ionized air is
recommended).
â Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be caerful not to scratch
the glass.
â Keep in case to protect from dust and dirt. To prevent dew condensation, preheat or precool when moving
to a room with great temperature differences.
â When a protective tape is applied before shipping, just before use remove the tape applied electrostatic
protection. Do not reuse the tape.
⢠Do not expose to strong light (sun rays) for long period, color filter are discolored.
⢠Exposure to high temperature or humidity will affect the characteristics. accordingly avoid storage or
usage in such conditions.
⢠CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
20
|