S3C9234 Datasheet, PDF (110/214 Pages) Samsung semiconductor – 8-Bit CMOS Microcontroller

S3C9234/P9234
SAM88RCRI INSTRUCTION SET
RR — Rotate Right
RR
Operation:
dst
C ¨ dst (0)
dst (7) ¨ dst (0)
dst (n) ¨ dst (n + 1), n = 0–6
The contents of the destination operand are rotated right one bit position. The initial value of bit zero
(LSB) is moved to bit 7 (MSB) and also replaces the carry flag (C).
7
0
C
Flags:
Format:
C: Set if the bit rotated from the least significant bit position (bit zero) was "1".
Z: Set if the result is "0"; cleared otherwise.
S: Set if the result bit 7 is set; cleared otherwise.
V: Set if arithmetic overflow occurred, that is, if the sign of the destination changed during
rotation; cleared otherwise.
D: Unaffected.
H: Unaffected.
opc
dst
Bytes
2
Cycles
4
4
Opcode
(Hex)
E0
E1
Addr Mode
dst
R
IR
Examples:
Given: Register 00H = 31H, register 01H = 02H, and register 02H = 17H:
RR
00H
→
Register 00H = 98H, C = "1"
RR
@01H
→
Register 01H = 02H, register 02H = 8BH, C = "1"
In the first example, if general register 00H contains the value 31H (00110001B), the statement "RR
00H" rotates this value one bit position to the right. The initial value of bit zero is moved to bit 7,
leaving the new value 98H (10011000B) in the destination register. The initial bit zero also resets the
C flag to "1" and the sign flag and overflow flag are also set to "1".
6-41