S6B1713 Datasheet, PDF (1/70 Pages) Samsung semiconductor – 65 COM / 132 SEG DRIVER & CONTROLLER FOR STN LCD

S6B1713
65 COM / 132 SEG DRIVER & CONTROLLER FOR STN LCD
March .2002
Ver. 4.2
Contents in this document are subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of LCD Driver IC Team.
Precautions for Light
Light has characteristics to move electrons in the integrated circuitry of semiconductors,
therefore may change the characteristics of semiconductor devices when irradiated with light.
Consequently, the users of the packages which may expose chips to external light such as
COB, COG, TCP and COF must consider effective methods to block out light from reaching
the IC on all parts of the surface area, the top, bottom and the sides of the chip. Follow the
precautions below when using the products.
1. Consider and verify the protection of penetrating light to the IC at substrate (board or
glass) or product design stage.
2. Always test and inspect products under the environment with no penetration of light.