|
S1M8660A Datasheet, PDF (1/32 Pages) Samsung semiconductor – RX IF / BBA WITH GPS | |||
|
RX IF/BBA WITH GPS
S1M8660A (Preliminary)
INTRODUCTION
S1M8660A is CDMA/AMPS/GPS Triple Mode IF/ baseband IC which is
divided into three main parts - IF frequency processing, basband
processing , and digital interface. The receiver IC (S1M8660A)and
transmitter IC (S1M8657) are provided as a KIT.
S1M8660A is a receiver IC, installed with a Rx AGC, Baseband
Converter, Baseband analog filter, and A-D Converter. It can send a
digital baseband signal to the digital baseband IC.
S1M8660A is fabricated on the Samsung's 0.5um high-speed, high
frequency BICMOS processing and can achieve superior high frequency
and low power digital operations.
Its operating voltage is 2.7 to 3.3V, and operating temperature
-30 to +85°C .
FEATURES
48-BCC+-7.0Ã7.0
⢠CDMA/AMPS/GPS Triple Mode
⢠AGC input signal range : 90dB
⢠QPSK Baseband Converter
⢠Built-in I ,Q Baseband signal extractor LPF
⢠Built-in 4-bit ADC for converting I and Q CDMA analog baseband signals to digital baseband signals
⢠Built-in 8-bit ADC for converting I and Q FM analog baseband signals to digital baseband signals
⢠Adopts the Rx SLOT function to minimize the AMPS Mode consumption power
⢠Built-in VCO for baseband conversion
⢠Built-in Modem PDM control circuit to compensate the I and Q offsets
⢠3-Line Serial Port Interface (SPI)
⢠Operating Voltage : 2.7 to 3.3V
⢠48BCC+(7mm * 7mm * 0.8mm) Package
ORDERING INFORMATION
Device
++ S1M8660AX01-F0T0
++ : Under Development
Package
48-BCC+-7.0Ã7.0
Operating Temperature
-30 to +85°C
1
|
▷ |