K9S6408V0A-SSB0 Datasheet, PDF (1/26 Pages) Samsung semiconductor – 8M x 8 Bit SmartMediaTM Card

K9S6408V0A-SSB0
Document Title
8M x 8 Bit SmartMedia^TM Card
SmartMedia^TM
Revision History
Revision No. History
0.0
Initial issue
0.1
1. Changed device name
- SMFV008A -> K9S6408V0A-SSB0
2. Changed the following items
ITEM
Before(M-die)
Program Time
1,000us(Max.)
Number of partial program
in the same page
10 cycles
0.2
1. Changed the following item
ITEM
Before(M-die)
Input and output timing levels
0.8V and 2.0V
0.3
Changed the following item
ITEM
Before(M-die)
Data transfer from Cell
to Register (tR)
7us(Max.)
Draft Date
April 10th 1999
Sep. 15th 1999
After(A-die)
500us(Max.)
Main Array: 2 Cycles
Spare Array: 3 Cycles
After(A-die)
1.5V
Oct. 20th 1999
After(A-die)
Jan. 10th 2000
10us(Max.)
Remark
Preliminary
Preliminary
Preliminary
Final
0.4
1. Changed invalid block(s) marking method prior to shipping
July 17th 2000
Final
- Physical format standard specifies that block status is defined by the
6th byte in the spare area. Samsung makes sure that the first page of
every invalid block has 00h data at the column address of 517(4MB
SmartMedia and higher densities) or 261(2MB SmartMedia).
--> Physical format standard by SSFDC Forum specifies that for the
invalid blocks the 6th byte in the spare area (column address 517 for
4MB SmartMedia and higher densities, 261 for 2MB SmartMedia,
respectively) contains two or more "0" bits to indicate a invalid block.
Note : For more detailed features and specifications including FAQ, please refer to Samsung’s Flash web site.
http://www.intl.samsungsemi.com/Memory/Flash/datasheets.html
The attached datasheets are prepared and approved by SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserve the right
to change the specifications. SAMSUNG Electronics will evaluate and reply to your requests and questions about device. If you have
any questions, please contact the SAMSUNG branch office near you.
1