CL32A106KA9LNNE Datasheet, PDF (1/2 Pages) Samsung semiconductor – SPECIFICATION

SPECIFICATION
• Supplier : Samsung electro-mechanics
• Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
• Samsung P/N : CL32A106KA9LNNE
• Description : CAP, 10㎌, 25V, ±10%, X5R, 1210
CL 32 A 106 K A 9 L N N E
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
1210 (inch code)
L: 3.2 ± 0.3 mm
W: 2.5 ± 0.2 mm
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
X5R
10 ㎌
±10 %
25 V
0.9 ± 0.1 mm
⑧ Thickness division
Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
Low profile
Ni
Cu
Sn 100% (Pb Free)
Normal
Reserved for future use
Embossed Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characterisitcs
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Test condition
Within specified tolerance
1㎑±10%
1.0±0.2 Vrms
0.1 max.
10,000Mohm or 100Mohm⋅㎌
Rated Voltage 60~120 sec.
Whichever is Smaller
No abnormal exterior appearance
Microscope (×10)
No dielectric breakdown or
250% of the rated voltage
mechanical breakdown
X5R
(From -55℃ to 85℃, Capacitance change shoud be within ±15%)
No peeling shall be occur on the
500g⋅F, for 10±1 sec.
terminal electrode
Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Tan δ, IR : initial spec.