|
CL31B225KBH4PNE Datasheet, PDF (1/2 Pages) Samsung semiconductor – Specification of Automotive MLCC | |||
|
Specification of Automotive MLCC
ï· Supplier : Samsung electro-mechanics
ï· Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
ï· Samsung P/N : CL31B225KBH4PNE
ï· Description :
CAP, 2.2ã, 50V, ±10%, X7R, 1206
ï· AEC-Q 200 Specified
CL 31 B 225 K B H 4 P N E
â â¡â¢ ⣠â¤â¥â¦â§â¨â©âª
â Series
â¡ Size
Samsung Multi-layer Ceramic Capacitor
1206 (inch code)
L: 3.2 ± 0.2
mm
W:
1.6 ± 0.2 mm
⢠Dielectric
⣠Capacitance
⤠Capacitance
tolerance
⥠Rated Voltage
⦠Thickness
X7R
2.2 ã
±10 %
50 V
1.6 ± 0.2 mm
⧠Inner electrode
Termination
Plating
⨠Product
â© Grade code
⪠Packaging
Ni
Metal Epoxy
Sn 100%
(Pb Free)
Automotive
Standard
Embossed Type, 7" reel
B. Reliability Test and Judgement condition
Performance
Test condition
High Temperature
Appearance : No abnormal exterior appearance Unpowered, 1000hrs@T=150â
Exposure
Capacitance Change : Within ±10%
Measurement at 24±2hrs after test conclusion
Tan δ : 0.03 max
IR : More than 10,000ã or 500ãÃã
Whichever is Smaller
Temperature Cycling Appearance : No abnormal exterior appearance 1000Cycles
Capacitance Change : Within ±10%
Measurement at 24±2hrs after test conclusion
Tan δ : 0.03 max
1 cycle condition :
IR : More than 10,000ã or 500ãÃã
-55+0/-3â(15±3min) -> Room Temp(1min.)
Whichever is Smaller
-> 125+3/-0â(15±3min) -> Room Temp(1min.)
Destructive Physical No Defects or abnormalities
Per EIA 469
Analysis
Moisture Resistance
Appearance : No abnormal exterior appearance 10Cycles, t=24hrs/cycle
Capacitance Change : Within ±12.5%
Heat (25~65â) and humidity (80~98%), Unpowered
Tan δ : 0.03 max
measurement at 24±2hrs after test conclusion
IR : More than 10,000ã or 500ãÃã
Whichever is Smaller
Humidity Bias
Appearance : No abnormal exterior appearance 1000hrs 85â/85%RH, Rated Voltate and 1.3~1.5V,
Capacitance Change : Within ±12.5%
Add 100kohm resistor
Tan δ : 0.035 max
Measurement at 24±2hrs after test conclusion
IR : More than 500ã or 25ãÃã
The charge/discharge current is less than 50mA.
Whichever is Smaller
High Temperature
Appearance : No abnormal exterior appearance 1000hrs @ TA=125â, 200% Rated Voltage,
Operating Life
Capacitance Change : Within ±12.5%
Measurement at 24±2hrs after test conclusion
Tan δ : 0.035 max
The charge/discharge current is less than 50mA.
IR : More than 1000ã or 50ãÃã
Whichever is Smaller
|
▷ |