CL31A475KOHNNNE Datasheet, PDF (1/2 Pages) Samsung semiconductor – CAP, 4.7㎌, 16V, ±10%, X5R, 1206

SPECIFICATION
 Supplier : Samsung electro-mechanics
 Product : Multi-layer Ceramic Capacitor
 Samsung P/N : CL31A475KOHNNNE
 Descriptiont : CAP, 4.7㎌, 16V, ±10%, X5R, 1206
A. Samsung Part Number
CL 31 A 475 K O H N N N E
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
1206 (inch code)
L: 3.2 ± 0.2 mm
W: 1.6 ± 0.2 mm
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
X5R
4.7 ㎌
±10 %
16 V
1.6 ± 0.2 mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
Ni
Cu
Sn 100% (Pb Free)
Normal
Reserved for future use
Embossed Type, 7" reel
B. Samsung Reliability Test and Judgement condition
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Test condition
Within specified tolerance
1㎑±10%
1.0±0.2Vrms
0.075 max.
10,000Mohm or 100Mohm㎌
Rated Voltage 60~120 sec.
Whichever is Smaller
No abnormal exterior appearance
Microscope (10)
No dielectric breakdown or
250% of the rated voltage
mechanical breakdown
X5R
(From -55℃ to 85℃, Capacitance change should be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Tan δ, IR : initial spec.