CL21A226MPCLRNC Datasheet, PDF (1/2 Pages) Samsung semiconductor – SPECIFICATION

SPECIFICATION
 Supplier : Samsung electro-mechanics
 Product : Multi-layer Ceramic Capacitor
 Samsung P/N : CL21A226MPCLRNC
 Description : CAP, 22㎌, 10V, ±20%, X5R, 0805
A. Samsung Part Number
CL 21 A 226 M P C L R N C
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
① Series
② Size
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
Samsung Multi-layer Ceramic Capacitor
0805 (inch code)
L: 2.0 ± 0.2 mm
W: 1.25 ± 0.2 mm
⑧ Thickness division Low profile
X5R
Inner electrode
Ni
22 ㎌
Termination
Cu
±20 %
Plating
Sn 100% (Pb Free)
⑨ Product
L,W size tolerance change code
10 V
⑩ Special
Reserved for future use
0.85 ± 0.1 mm
⑪ Packaging
Cardboard Type, 7"reel(4,000ea)
B. Samsung Reliability Test and Judgement condition
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Within specified tolerance
0.1 max.
More than 100Mohm㎌
120㎐±20%
Test condition
0.5±0.1Vrms
Rated Voltage 60~120 sec.
No abnormal exterior appearance
Visual inspection
No dielectric breakdown or
250% of the rated voltage
mechanical breakdown
X5R
(From -55℃ to 85℃, Capacitance change should be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Tan δ, IR : initial spec.