CL10F474ZB8NNNC Datasheet, PDF (1/2 Pages) Samsung semiconductor – SPECIFICATION

SPECIFICATION
 Supplier : Samsung electro-mechanics
 Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
 Samsung P/N : CL10F474ZB8NNNC
 Descriptiont : CAP, 470㎋, -20/+80%, 50V,Y5V,0603
CL 10 F 474 Z B 8 N N N C
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
0603 (inch code)
L: 1.6 ± 0.1 mm
W: 0.8 ± 0.1 mm
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
Y5V
470 ㎋
-20/+80 %
50 V
0.8 ± 0.1 mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
Ni
Cu
Sn 100% (Pb Free)
Normal
Reserved for future use
Cardboard Type, 7"reel(4,000ea)
B. Samsung Reliability Test and Judgement condition
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Within specified tolerance
0.07 max.
More than 100Mohm㎌
1㎑±10%
Test condition
1.0±0.2Vrms
Rated Voltage 60~120 sec.
No abnormal exterior appearance
Visual inspection
No dielectric breakdown or
250% of the rated voltage
mechanical breakdown
Y5V
(From -30℃ to 85℃, Capacitance change should be within -82~+22%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±30% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change : within ±20% Solder pot : 270±5℃, 10±1sec.
Tan δ, IR : initial spec.