CL03C180JA3 Datasheet, PDF (1/2 Pages) Samsung semiconductor – Samsung electro-mechanics

SPECIFICATION ^{(Reference sheet)}
 Supplier : Samsung electro-mechanics
 Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
 Samsung P/N : CL03C180JA3ANNC
 Description : CAP, 18㎊, 25V, ±5%, C0G, 0201
CL 03 C 180 J A 3 A N N C
① ②③ ④ ⑤⑥⑦ ⑧ ⑨⑩⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
0201 (inch code)
L: 0.6 ± 0.03 mm
W: 0.3 ± 0.03 mm
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
C0G
18 ㎊
±5 %
25 V
0.3 ± 0.03 mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
Pd
Ag
Sn 100% (Pb Free)
Normal
Reserved for future use
Cardboard Type, 7" reel
B. Samsung Reliability Test and Judgement condition
Capacitance
Q
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Test condition
Within specified tolerance
1㎒±10%
0.5~5Vrms
760 min
10,000Mohm or 500Mohm㎌
Rated Voltage
60~120 sec.
Whichever is Smaller
No abnormal exterior appearance
Microscope (10)
No dielectric breakdown or
300% of the rated voltage
mechanical breakdown
C0G
(From -55℃ to 125℃, Capacitance change should be within ±30PPM/℃)
No peeling shall be occur on the
200gF, for 10±1 sec.
terminal electrode
Capacitance change :
Bending to the limit (1mm)
within ±5% or ±0.5㎊ whichever is larger with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change :
Solder pot : 270±5℃, 10±1sec.
within ±2.5% or ±0.25㎊ whichever is larger
Tan δ, IR : initial spec.