SA541 Datasheet, PDF(11/16 Page) Sames – PULSE/DTMF SWITCHABLE DIALLERS

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SA541 Datasheet, PDF (11/16 Pages) Sames – PULSE/DTMF SWITCHABLE DIALLERS

◁

DTMF Tone Filtering

SA541

Figure 3: 2-Pole Sallen and Key Filter Circuit

9. DTMF Dialling (Figure 4)

During DTMF dialling, the MUTE output goes to logic â1â and remains there for the

duration of the tone transmission. The IMP output remains low during tone

transmission. The MF OUT output rises to its d.c. level of 0,9 VDD at the start of the

tone transmission and is kept there between tone bursts. This is to avoid transients

at the beginning and end of tone bursts.

The maximum rate at which tones are sent to line is 100ms on, followed by 100ms

off. If keys are activated faster than this, they are placed in a temporary store and

then sent to line at the maximum rate. Dialling from the LNR store occurs at the

maximum rate.

If a key is held down for longer than 100ms, the tone output will continue until the

key is released.

sames

11/16

▷