SA9103E Datasheet, PDF (1/14 Pages) Sames – SINGLE PHASE BIDIRECTIONAL POWER/ENERGY METERING IC WITH SERIAL INTERFACE

sames
SA9103E
SINGLE PHASE BIDIRECTIONAL POWER/ENERGY
METERING IC WITH SERIAL INTERFACE
FEATURES
n Performs bidirectional active power/ n Operates over a wide temperature
energy measurement
range
n Meets the IEC 521/1036 Specification n Serial interface having a RS232
requirements for Class 1 AC Watt hour
protocol
meters
n Precision voltage reference on-chip
n Protected against ESD
n Tri-state output to allow parallel
n Power consumption rating below 25mW
connection of devices.
n Adaptable to different current sensor
technologies
DESCRIPTION
The SAMES SA9103E Single Phase
bidirectional Power/Energy metering
integrated circuit has a serial interface with
a RS232 protocol, ideal for use with a µ-
Controller. The SA9103E performs the
calculation for active power.
The integrated value for active energy is
accessable through the RS232-Interface
as a 16 bit value.
This innovative universal single phase
power/energy metering integrated circuit
is ideally suited for energy calculations in
applications such as electricitydispensing
systems (ED's), residential municipal
metering and factory energy metering and
control.
The SA9103E integrated circuit is available
in both 20 pin dual-in-line plastic (DIP-20),
as well as 20 pin small outline (SOIC-20)
package types.
PIN CONNECTIONS
IIN
1
IIP
2
VREF 3
CPON ⁴
CPOP ⁵
CPIN ⁶
CPIP ⁷
V _{DD 8}
TP9
9
OSC2 10
20 _GND
19 _IVP
18 _CON
17 _COP
16 _CIN
15 _CIP
14 ^V SS
13 _SIN
12 SOUT
11 OSC1
DR-00917
Package: DIP-20
SOIC-20
4353
PDS039-SA9103E-001
1/14
REV. B 14-11-1996