LO43SHX Datasheet, PDF (1/2 Pages) saftbatteries – 3.0 V Primary lithium - sulfur dioxide

Primary lithium batteries
LO 43 SHX
3.0 V Primary lithium - sulfur dioxide (Li-SO₂)
Very high drain and pulse capability
5_{/4 C-size spiral cell}
Benefits
ɀ High and stable discharge
voltage
ɀ Superior pulse capability
ɀ Performance not affected by cell
orientation
ɀ Long storage possible before use
ɀ Ability to withstand extreme
temperature
Key features
ɀ Low self - discharge rate
(less than 3 % after 1 year of
storage at + 20 °C)
ɀ Hermetic glass-to-metal sealing
ɀ Built-in safety vent
(at the negative end of the cell)
ɀ Restricted for transport (class 9)
ɀ UL Component Recognition
(File Number MH 15076)
ɀ Meets shock, vibration and other
environmental requirements of
military specifications
ɀ Made in the USA
Main applications
ɀ Radiocommunications and other
military applications
ɀ Beacons and Emergency Location
Transmitters
ɀ Sonobuoys
ɀ Emergency car door opening
system
Cell size references
5_{/4 R14 –} 5_{/4 C}
Electrical characteristics
(typical values for cells stored for one year or less)
Nominal capacity
(at 0.2 A + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
according to current drain, temperature and cut-off)
Open circuit voltage (at + 20°C)
Nominal voltage
(at 0.6 A + 21°C/+ 70°F)
Maximum recommended continuous current
(to avoid over-heating. Higher currents possible, consult Saft)
5.0 Ah
3.0 V
2.8 V
2.5 A
Pulse capability : Typically up to 10 A
(The voltage readings
the temperature, and
may
the
cvealrl,sy
according to the
previous history.
pulse characteristics,
Fitting the cell with a
capacitor may be recommended in severe conditions. Consult Saft)
Storage
(recommended)
(possible without leakage)
Operating temperature range
(Short excursions up to + 85 °C possible at currents below 1 A)
+(3__076°_{6C0°°F(C+//8++618}°_8F5)5°mC_°Fa) x
(__7660°°FC//++17508^°C°F)
Physical characteristics
Diameter (max)
Height (max; finish with radial tabs)
Typical weight
Li metal content
Standard cell comes with resin potting at the positive end
and two radial 0.15 mm - thick nickel tabs
Other finish configurations available on request.
26.0 mm (1.02 in)
59.2 mm (2.33 in)
53 g (1.86 oz)
1.7 g
February 2008