BA5800A Datasheet, PDF (1/2 Pages) saftbatteries – Li-SO2 primary battery system

Li-SO₂ primary battery system
BA 5800 A/U
Assembled from 2 LO 26 SX cells
connected in series.
Key features
• A non-replaceable fuse is
incorporated in the negative leg.
• A normally closed thermal fuse
(TCO) is incorporated in the
battery. It is non-replaceable
and non-resetable.
• A diode is incorporated to
prevent charging or flow of
current into the battery.
• A device consisting of a
manually activated switch and
resistor designed to discharge
the battery to 0 V is built into
the battery.
• Made in the USA
Typical applications
• AN/PSN-11
GPS
• AN/PSN-10 (V) GPS
• Chemical Agent Monitor
Electrical Characteristics
Typical OCV (V)
Nominal voltage (at 500mA) (V)
Cut-off (V)
Typical Capacity (Ah) +21 °C / + 70 °F
(at 250 mA discharge current)
Operating temperature
Storage
Recommended max
Possible
6.0
5.3
4.0
7.5
-40° C to 71° C
-40° F to 160° F
+35°C/ +95°F
-40° C to 71° C / -40° F to 160° F
Physical Characteristics
Typical Weight (g/oz)
Weight of Li metal content (g/oz)
Max. OD (mm/ in)
Max. Height (mm/ in)
Battery Case
References
Reference specifications
NSN Reference
220 / 7.76
4.8 / 0.17
35.51/ 1.398
128.5 / 5.059
Plastic
MIL PRF 49471B (CR) or Saft Standard Specifications
6135-01-440-7774
March 2006