BA5380 Datasheet, PDF (1/2 Pages) saftbatteries – Primary lithium battery system

Primary lithium battery system
BA 5380
6 V Primary lithium manganese dioxide (Li-MnO₂) battery
The battery consists of 2 LM 33550 cells
connected in series.
Key Features
■■ A non-replaceable fuse is
incorporated on the battery negative
■■ A normally closed thermal fuse (TCO)
is incorporated in the battery. It is
non-replaceable and non-resettable
■■ A blocking diode is incorporated to
prevent charging
■■ A non-replaceable fuse is connected
between the two cells for added safety
■■ A complete discharge device (CDD)
with LED activation indicator is built
into the battery. The CDD consists of
a manually activated switch to connect
a resistor for discharging the battery
to 0 V
■■ Made in the U.S.A.
Typical applications
■■ AN/PSN-11 GPS
■■ AN/PSN-10 (V) GPS
■■ Chemical Agent Monitor
Electrical charachteristics
Typical OCV
Nominal voltage (at 500 mA)
Cut-off
Typical capacity +21˚C / +70˚F
(at 250 mA discharge current)
Operating temperature
Storage (Recommended max)
(Possilbe)
Physical characteristics
Max weight
Weight of Li metal content
Max OD
Max height
Battery case
References
Reference specifications
Nato Stock Number
6.0 V
5.4 V
4.0 V
13 Ah
-40˚C to +71˚C / -40˚F to +160˚F
+35˚C / +95˚F
-40˚C to +71˚C / -40˚F to +160˚F
327 g / 11.5 oz
7.4 g / 0.26 oz
35.51 mm / 1.398 in
128.5 mm / 5.059 in
Plastic
MIL PRF 32271 or Saft standard specification
6135-01-517-4954