LCE Datasheet, PDF (2/7 Pages) EIC discrete Semiconductors – LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

Transient Voltage Suppressors - LCE Series
Features
1. Halogen-free
2. Rohs compliant
3. Typical maximum temperature coefficient
4. ΔVBR =0.1%xVBR@25°C x ΔT
5. Glass passivated Chip junction in P600 package
6. 1500W peak pulse capadility at 10x1000μs waveform,repetition rate (duty
cycles):0.01%
7. Fast response time:typically less than 1.0ps from 0 Volts to BV min
8. Excellent clamping capability
9. Low incremental surge resistance
10. Typical IR less than 5μA above 12V
11. High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,
\(9.5mm) lead length, 5lbs., (2.3kg)tension
12. Plastic package has underwriters laboratory flammability classification
94v-0
UNI
Cathode
Anode
UNI
Applications
TVS devices are ideal for the protection of I/O interfaces,VCC bus and other vulnerable circuits used in telecom, computer,
industrial and consumer electronic applications.
Mechanical Characteristics
Rating
Symbol
Peak Pulse Power Dissipation by 10x1000μs test waveform
(Fig.1)(Note 1)
Steady State Power Dissipation on
inifinite heat sink at TL=75°C (Fig. 5)
P_PPM
P_D
Operating junction and Storage Temperature Range.
T_J,T_STG
Notes:
Non-repetitive current pulse , per Fig. 3 and derated above T_A = 25°C per Fig. 2.
Value
30000
8
-55°C to 175°C
Units
Watts
Watts
°C
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com for current information. Page:1