QP-150 Datasheet, PDF (4/5 Pages) Astrodyne Corporation – 150W Quad Output with PFC Function

RSG■
ELECTRONIC COMPONENTS
RSG Electronic Components GmbH ^■ Sprendlinger Landstr. 115 ^■ D-63069 Offenbach/Germany
Tel. [phone] ^■ Fax [phone] ^■ [e-mail] ^■ www.rsg-electronic.de
Änderungen vorbehalten / subject to change without notice
150W Quad Output with PFC Function
QP-150B,C series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections:Short circuit/Over load/Over voltage
Forced air cooling by built-in DC fan
Fixed switching frequency at 100KHz
3 years warranty
..
SPECIFICATION
MODEL
QP-150B
QP-150C
OUTPUT NUMBER
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
DC VOLTAGE
5V
12V
-12V
-5V
5V
15V
-15V
-5V
RATED CURRENT
15A
4A
2A
0.6A
15A
3A
2A
0.6A
CURRENT RANGE
3 ~ 15A
0.4 ~ 5A
0.3 ~ 2A
0 ~ 1A
3 ~ 15A
0.4 ~ 4A
0.3 ~ 2A
0 ~ 1A
RATED POWER (max.)
150W
153W
RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p
OUTPUT
VOLTAGE ADJ. RANGE
CH1:4.75 ~ 5.5V
150mVp-p
100mVp-p
100mVp-p 150mVp-p
CH1:4.75 ~ 5.5V
150mVp-p
100mVp-p
VOLTAGE TOLERANCE Note.3 3.0%
6.0%
+10,-6%
5.0%
3.0%
+6,-10%
8.0%
5.0%
LINE REGULATION
1.0%
2.0%
2.0%
1.0%
1.0%
2.0%
2.0%
1.0%
LOAD REGULATION
2.0%
6.0%
6.0%
2.0%
2.0%
6.0%
6.0%
2.0%
SETUP, RISE TIME
1000ms, 50ms at full load
HOLD TIME (Typ.)
24ms at full load
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/230VAC PF>0.98/115VAC at full load
INPUT
EFFICIENCY (Typ.)
76%
77%
AC CURRENT (Typ.)
2.5A/115VAC 1.2A/230VAC
INRUSH CURRENT (Typ.) COLD START 40A
LEAKAGE CURRENT
<3.5mA / 240VAC
OVER LOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
CH1:5.75 ~ 6.75V
Protection type : Shut down o/p voltage, re-power on to recover
95 5 (TSW1)
OVER TEMPERATURE(OPTION) _{Protection type : Shut down o/p voltage, recovers automatically after temperature goes down}
WORKING TEMP.
-10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0~50 )
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 Approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY &
EMC
(Note 4)
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
OTHERS
NOTE
MTBF
141.5K hrs min. MIL-HDBK-217F (25 )
DIMENSION
199*99*50mm (L*W*H)
PACKING
1.1Kg; 20pcs/22Kg/1.28CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:QP-150B,C-SPEC 2006-08-22