TEN06 Datasheet, PDF (1/3 Pages) RSG Electronic Components GmbH – 6 WATTS DC-DC CONVERTER

TEN06 SERIES
6 WATTS DC-DC CONVERTER
FEATURES
• 6 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 1200mA
• PACKAGE, 1.61 x 1.02 x 0.33 INCH
• HIGH EFFICIENCY UP TO 85%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIVE-SIDED SHIELD
• SWITCHING FREQUENCY 100k TO 1500kHz.
• NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
• LOW RIPPLE & NOISE
• OVER CURRENT PROTECTION
• SHORT CIRCUIT PROTECTION
• LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR
• CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
• SAFETY MEETS J60950-1, UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The TEN06 series offer 6 watts of output power from a 1.61 x 1.02 x 0.33 inch
package without derating to 50ºC and without external input/output capacitor. The
TEN06 series with 2:1 wide input voltage of 4.5~9VDC, 9~18VDC, 18~36VDC and
36~75VDC and features 500VAC of isolation, short-circuit protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Maximum output power
6 Watts
Voltage accuracy
± 1%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
± 0.5%
Ripple and noise
50MHz bandwidth
See table
Maximum temperature drift
±0.02% / ºC
Transient response recovery time 25% load step change
500µs
Short circuit protection
Continuous, automatics recovery
Over current protection
150%
OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) (Note 6)
Model number
XXS33
XXS05
XXS12
XXD12
Model number
XXS33
XXS05
XXS12
XXD12
Open -OUTPUT shorted +OUTPUT shorted
3.3VDC
3.67VDC
2.84VDC
5VDC
6VDC
4.3VDC
12VDC
15VDC
-
±12VDC
±15VDC
-
Open
-OUTPUT connected +OUTPUT connected
with resistance (7) with resistance (7)
3.3VDC 3.3 to 3.67VDC (8-1) 3.3 to 2.84VDC (8-2)
5VDC 5 to 6VDC
(8-3) 5 to 4.3VDC (8-4)
12VDC 12 to 15VDC (8-5)
-
±12VDC ±12 to ±15VDC (8-6)
-
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Isolation capacitance
Design meet safety
standard
Switching frequency
Case material
Base material
Weight
Dimension
MTBF (Note 1)
See table
Input to Output
500 VAC, min. 1minute
Input (Output) to Case 500 VAC, min. 1minute
Input to Output
50M ohms, min. 500VDC
Input (Output) to Case 50M ohms, min. 500VDC
300 pF, max.
IEC60950-1, J60950-1, UL60950-1, EN60950-1
Full load to No load
100k to 1500k Hz
Metal case
None
20.0g (0.71oz)
1.61 x 1.02 x 0.33 Inch
(41 x 25.8 x 8.5 mm)
BELLCORE TR-NWT-000332 3.706 x 10⁶ hrs
MIL-HDBK-217F
1.679 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
5VDC nominal input
12VDC nominal input
24VDC nominal input
48VDC nominal input
Input filter
Input surge voltage
100mS max
5VDC input
12VDC input
24VDC input
48VDC input
Remote ON/OFF
4.5 ~ 9VDC
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
L-C filter
15VDC 100ms, max.
36VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
See figure 1
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-25ºC ~ +85ºC (with derating)
Operating case temperature range
-25ºC ~ +100ºC
Storage temperature range
-55ºC ~ +125ºC
Cooling
Nature convection
Thermal shock
MIL-STD-810F
Vibration
At no operation, 10~55~10Hz (sweep for 15min.) amplitude
1.5mm constant (maximum 9G X, Y, Z 2hrs each)
Operating humidity range
20% to 95% RH
Storage humidity range
20% to 95% RH
EMC CHARACTERISTICS
EMI (Note 9)
EN55022
Class A, Class B
Page 1 of 3
www.pduke.com
2013/5/3