RS8-0505R10A1 Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

1.0W Regulated
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 6 Pin SIL Package
• Wide 2:1 Input Range
• 1500VDC Isolation
• Continuous Short Circuit Protection
• no minimum Load required
• Efficiency up to 81%
• Operating Temperature Range
-40° ~ +85°C
• Non Conductive Black Plastic Case
RoHS
OUTPUT SPECIFICATION
ENVIRONMENTAL SPECIFICATION

Voltage accuracy: ±2%
Operating Temperature range: -40°C ~+85°C (see Derating Curve)

Maximum Output Current: See table
Maximum Case Temperature: 105°C
Line regulation: ± 0.2% max.
Storage Temperature : -55°C ~+125°C

LOAD REGULATION: 0% - 100% (Single/Dual Outp.): ±1% max./±2% max.
Cooling : Nature Convection
5% - 100% (Dual Outp.): ±1% max.
PHYSICAL SPECIFICATIONS:
Cross Regulation (Dual Output): ± 5%

Case Material: Non-conductive Black Plastic (UL94V-0 rated)
Short Circuit Protection : Continuous(Automatic Recovery )
PIN MaterialSIP Case: C5191T-H Solder coated
Ripplenoise (20Mhz bandwidth): 50mV pk-pk max.
Potting Material: Epoxy (UL94V-0 rated)
Temperature coefficient: ±0.02% °C
Weight Case- Sip: 3.0g,
Capacitor load: See table
Dimmension SIP: 0.67 x 0.30 x 0.43“
Transient Recovery Time: 500us, typ.
ABSOLUTE MAXIMUM RATINGS (1)
Transient Response: ( Deviation) ±3% max.
Input Surge Voltage (100ms)/
INPUT SPECIFICATIONS
5 V Models: 15VDC max.

Voltage Range: See table
12V Models: 25VDC max.
Max. Input Current: See table
24V Models: 50VDC max.
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
48V Models: 100VDC max.
Soldering Temperature: 260°C max. ⁽²⁾
Input Reflected Ripple Current : 35mA pk-pk
EMC SPECIFICATIONS
GENERAL SPECIFICATIONS
Radiated-/Conducted Emissions: EN55022 Class A
Efficiency: See table
ESD: IEC 61000-4-2 Perf.Criteria A
I/O Isolation Voltage (60sec): 1500VDC
RS: IEC 61000-4-3 Perf.Criteria A
I/O Isolation Capacitance: 70pF typ.
EFT: IEC 61000-4-4 Perf.Criteria A
I/O Isolation Resistance: 1000M Ohm, min
SURGE: IEC 61000-4-5 Perf.Criteria A
Switching Frequency: 150 - 550kHz
CS: IEC 61000-4-6 Perf.Criteria A
Humidity: 95% rel H
PFMF IEC 61000-4-8 Perf.Criteria A
Reliability Calculated MTBF : > 2.8MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC EN 60950-1
1) These are stress ratings. Exposure of devices to any of these conditions may
adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load
unless otherwise specified.
4) The information and specification contained in this data sheet are believed
to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies.
Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (4)