RS7-XX03S10A6 Datasheet, PDF (1/3 Pages) RSG Electronic Components GmbH – DC/DC-Converter

1.0W Unregulated Single
& Dual Output
• 7 Pin SIL Package
• 6000VDC High Isolation
• Physical Clearance of Isolation Barrier 2.5mm
• Long Term Short Circuit Protection
• Low Ripple and Noise
• Efficiency up to 81%
• Operating Temperature Range -40° ~ +85°C
• Non Conductive Black Plastic Case
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
OUTPUT SPECIFICATION
Voltage accuracy: ±3%
Line regulation:1.2%/ per 1% Vin Change max.
LOAD REGULATION: from 10% to 100% Load: ±10%
Short Circuit Protection : Indefinite (Automatic Recovery)
Ripple noise (20Mhz bandwidth): 200mV pk-pk
Temperature coefficient: ±0.03%/°C
Capacitor load: See table
INPUT SPECIFICATIONS
Voltage Range: ±10% max.
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
Input Reflected Ripple Current : 20mA rms
(rms thru 12uH inductor , 5Hz to 20MHz)
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage (60sec): 6000VDC
I/O Isolation Capacitance: 10pF typ.
I/O Isolation Resistance: 1000M Ohm, min
Switching Frequency: 20kHz - 50kHz
Humidity: 95% rel H
Reliability Calculated MTBF : >2.39MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Maximum Case Temperature: 100°C
Storage Temperature : -40°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Epoxy encapsulated (UL94V-0 rated)
Clearance Distance Inp./Outp. 2.5mm
PIN Material: 0.5mm Alloy42 Solder-coated
Weight Case- Sip: 4.2g, typ.
Potting Material: Epoxy (UL94V-0 rated)
Dimmension SIP: 0.77 x 0.39 x 0.49“
ABSOLUTE MAXIMUM RATINGS (1)
Input Surge Voltage (100ms)/
5V Models: 7VDC max
12V Models: 15VDC max
15V Models: 18VDC max
24V Models: 28VDC max
Soldering Temperature: 260°C max.
EMC SPECIFICATIONS (2)
Radiated-/Conducted Emissions: EN55022 Class B see EMI Filter
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication.
However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] • Rsg-electronic.de
page 1 (3)