RS7-0503S20A5 Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

2.0W Unregulated Single
& Dual Output
• 7 Pin SIL Package
• 5200VDC High Isolation
• Low coupling capacity
• Long Term Short Circuit Protection
• Low Ripple and Noise
• Efficiency up to 85%
• Operating Temperature Range -40° ~ +95°C
• Non Conductive Black Plastic Case
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
OUTPUT SPECIFICATION
Voltage accuracy: ±5%
Line regulation:1.2%/ per 1% Vin Change max.
LOAD REGULATION: from 20% to 100% Load: ±10-12%
Cross Regulation (Dual Output): ± 5%
Short Circuit Protection : Indefinite (Automatic Recovery)
Ripple noise (20Mhz bandwidth): 150mV pk-pk
Temperature coefficient: ±0.03%/°C
Capacitor load: See table
INPUT SPECIFICATIONS
Voltage Range: ±10% max.
Start up Time: 20ms,typ.
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
Input Reflected Ripple Current : 20-40mA pk-pk typ.
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage (60sec): 5200VDC
I/O Isolation Capacitance: 7pF typ.
I/O Isolation Resistance: 1000M Ohm, min
Switching Frequency: 50kHz - 100kHz
Humidity: 95% rel H
Reliability Calculated MTBF : >3.3MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+95°C (see Derating Curve)
Maximum Case Temperature: 100°C
Storage Temperature : -55°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Non-conductive Black Plastic (UL94V-0 rated),
PIN MaterialSIP Case: C519R-H Solder -coated
Weight Case- Sip: 2.7g, typ.
Potting Material: Epoxy (UL94V-0 rated)
Dimmension SIP: 0.76 x 0.28 x 0.39“
ABSOLUTE MAXIMUM RATINGS (1)
5V Models: 9VDC max
12V Models: 18VDC max
15V Models: 20VDC max
24V Models: 30VDC max
Soldering Temperature: 260°C max.
EMC SPECIFICATIONS (2)
Radiated-/Conducted Emissions: EN55022 Class B see EMI Filter
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication.
However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] • Rsg-electronic.de
page 1 (4 )