RS5-0503R60A1 Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

6.0W Regulated Single &
Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 8 Pin SIL Package
• Wide 2:1 Input Range
• 1500VDC Isolation
• Up to 3000VDC Isoltation
• Continuous Short Circuit Protection
• Efficiency up to 86%
• Operating Temperature Range -40° ~ +65°C
• Non Conductive Black Plastic Case
• Remote on/off Control(Optional)
OUTPUT SPECIFICATION
Voltage accuracy: ±1%
Maximum Output Current: See table
Line regulation:± 0.2% max.
LOAD REGULATION: from 0% to 100% Load: ±1% max.
Cross Regulation (Dual Output): ± 5%
Short Circuit Protection : Continuos (Automatic Recovery )
Ripple noise (20Mhz bandwidth): 75mV pk-pk max.
Temperature coefficient: ±0.02%/°C
Capacitor load: See table
Transient Recovery Time: 500us, typ.
Transient Response: (Deviation) ±3%- ±5%max.
INPUT SPECIFICATIONS
Voltage Range: See table
Start up Time: 30ms,typ.
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
Input Reflected Ripple Current : 30mA pk-pk typ.
Remote On/Off (positive logic): On: Open or high impedance,
OFF: 2-4mA input current (via 1KOhm)
OFF stand by current (nominal Vin): 2.5mA typ.
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage (60sec): 1500 ~ 3000VDC
I/O Isolation Capacitance: 50pF typ.
I/O Isolation Resistance: 1000M Ohm, min
Switching Frequency: 100kHz min.
Humidity: 95% rel H
Reliability Calculated MTBF : > 770KHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
Remote on Controll: see note
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+65°C (see Derating Curve)
Maximum Case Temperature: 105°C
Storage Temperature : -40°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Non-conductive Black Plastic (UL94V-0 rated)
PIN MaterialSIP Case: C519R-H Solder -coated
Weight Case- Sip: 4.8g, typ.
Potting Material: Epoxy (UL94V-0 rated)
Dimmension SIP: 0.86 x 0.36 x 0.44“
ABSOLUTE MAXIMUM RATINGS (1)
Input Surge Voltage (100ms)/
5V Models: 15VDC max.
12V Models: 25VDC max.
24V Models: 50VDC max.
48V Models: 100VDC max.
Soldering Temperature: 260°C max.
EMC SPECIFICATIONS (2)
Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication.
However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] • Rsg-electronic.de
page 1 (4)