RS5-0503R30A1 Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

3.0W Regulated
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 8 Pin SIL Package
• Wide 2:1 Input Range
• 1600VDC Isolation
• Continuous Short Circuit Protection
• Efficiency up to 84%
• Operating Temperature Range
-40° ~ +85°C
• Plastic Case Standard , Metal Case (optional)
• Remote on/off control (optional)
RoHS
OUTPUT SPECIFICATION
ENVIRONMENTAL SPECIFICATION
Voltage accuracy: ±1%
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Maximum Output Current: See table
Maximum Case Temperature: 100°C
Line regulation:± 0.5% max.
Storage Temperature : -40°C ~+125°C
LOAD REGULATION: From 25% to 100% Loading ±1% max
Cooling : Nature Convection
Cross Regulation (Dual Output): ± 5%
PHYSICAL SPECIFICATIONS:
Short Circuit Protection : Indefinite (Automatic Recovery )
PIN Material: Non conductive black plastic
Ripplenoise (20Mhz bandwidth): 75mV pk-pk max.
PIN MaterialSIP Case: C519R-H Solder -coated
Temperature coefficient: ±0.02% °C
Potting Material: Epoxy (UL94V-0 rated)
Capacitor load: See table
Weight Case- Sip: 4.8g, typ.
Transient Recovery Time: 300us, typ.
Dimmension SIP: 0.86 x 0.36 x 0.44“
Transient Response: ( Deviation) ±3% max.
ABSOLUTE MAXIMUM RATINGS (1)
INPUT SPECIFICATIONS
Input Surge Voltage (100ms)/ max.
Voltage Range: See table
5 V Models: 15VDC max.
Start up Time: 20ms, typ.
12V Models: 36VDC max.
Max. Input Current: See table
24V Models: 50VDC max.
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
48V Models: 100VDC max.
Soldering Temperature: 260°C max. ⁽²⁾
Input Reflected Ripple Current : 35mA pk-pk
EMC SPECIFICATIONS
GENERAL SPECIFICATIONS
Radiated-/Conducted Emissions: EN55022 Class A (see EMI Filter note)
Efficiency: See table
ESD: IEC 61000-4-2 Perf.Criteria A
I/O Isolation Voltage (60sec): 1600VDC
RS: IEC 61000-4-3 Perf.Criteria A
I/O Isolation Capacitance: 680pF max.
EFT: IEC 61000-4-4 Perf.Criteria A
I/O Isolation Resistance: 1000M Ohm, min
SURGE: IEC 61000-4-5 Perf.Criteria A
Switching Frequency: 100 - 650kHz
CS: IEC 61000-4-6 Perf.Criteria A
Humidity: 95% rel H
PFMF IEC 61000-4-8 Perf.Criteria A
Reliability Calculated MTBF : > 1.34MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC EN 60950-1
Remote on Controll: on: open or high impedance
Remote off Controll: off: 3-6mA input current (via 1K)
Off stand by current (Nominal Vin): 3mA max.
1) These are stress ratings. Exposure of devices to any of these conditions may
adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load
unless otherwise specified.
4) The information and specification contained in this data sheet are believed
to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies.
Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (4)