RS5-0503R10AX Datasheet, PDF (1/6 Pages) RSG Electronic Components GmbH – DC/DC-Converter

1.0W Regulated
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 8 Pin SIL/ 16Pin DIL Package
• Wide 2:1 Input Range
• 1000VDC Isolation
• Up to 3000VDC Isolation
• Continuous Short Circuit Protection
• Efficiency up to 77%
• Operating Temperature Range
-40° ~ +85°C
• Non Conductive Black Plastic Case,
Metal Case (optional)
• Remote on/off Control (optional)
RoHS
OUTPUT SPECIFICATION
ENVIRONMENTAL SPECIFICATION

Voltage accuracy: ±2%
Operating Temperature range: -40°C ~+85°C (see Derating Curve)

Maximum Output Current: See table
Maximum Case Temperature: 100°C
Line regulation:± 0.5% max.
Storage Temperature : -40°C ~+125°C

LOAD REGULATION: from 25% to 100% Loading: ±1% max.
Cooling : Nature Convection
Cross Regulation (Dual Output): ± 5%
PHYSICAL SPECIFICATIONS:
Short Circuit Protection : Indefinite(Automatic Recovery ) Case Material:Non-conductive Black Plastic (UL94V-0 rated)
Ripplenoise (20Mhz bandwidth): 80mV pk-pk max.
Nickel-coated Copper
Temperature coefficient: ±0.02%°C
PIN MaterialSIP Case: Alloy42 Solder-coated
Capacitor load: See table
PIN MaterialDIP Case: Brass Solder-coated Ø 0.5mm
INPUT SPECIFICATIONS
Potting Material: Epoxy (UL94V-0 rated)

Voltage Range: See table
Weight Case- Sip: 4.5g, (6.0g Metal Case)
Max. Input Current: See table
Weight Case-DIP: 6.5g, (8g Metal-Case)
No-Load/Full-Load Input Current: See table
Dimmension SIP: 0.86 x 0.36 x 0.44“
Input Filter: Capacitors
Dimmension DIP: 0.92 x 0.55 x 0.40“
Input Reflected Ripple Current : 35mA pk-pk
ABSOLUTE MAXIMUM RATINGS (1)
GENERAL SPECIFICATIONS
Input Surge Voltage (100ms)/
Efficiency: See table
5 V Models: 12VDC max.
I/O Isolation Voltage (60sec): 1000 ~ 3000VDC
12V Models: 24VDC max.
I/O Isolation Voltage Metal Case: 1000VDC
24V Models: 40VDC max.
I/O Isolation Capacitance: 60pF typ. max.
48V Models: 80VDC max.
I/O Isolation Resistance: 1000M Ohm, min
Soldering Temperature: 260°C max.
Switching Frequency: 100 - 650kHz
EMC SPECIFICATIONS (2)
Humidity: 95% rel H
Radiated-/Conducted Emissions:EN55022 Class A (see EMI Filter note)
Reliability Calculated MTBF : > 1.66MHrs
(MIL-HDBK-217 f)
ESD: IEC 61000-4-2 Perf.Criteria B
RS: IEC 61000-4-3 Perf.Criteria A
Safety Standard: (designed to meet): IEC EN 60950-1
EFT: IEC 61000-4-4 Perf.Criteria B
Remote ON/OFF Controll: see note
SURGE: IEC 61000-4-5 Perf.Criteria B
1) These are stress ratings. Exposure of devices to any of these conditions may
adversely affect long-term reliability.
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (6)