RS2-0505S10AXT Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

1.0W High temperature
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 7 Pin SIL Package
• 1500VDC Isolation
• Up to 3000VDC Isolation
• Continuous Short Circuit Protection
• Low Ripple and Noise
• Efficiency up to 81%
• Operating Temperature Range:
-40° ~ +105°C
• Non Conductive Black Plastic Case
• EMI Complies with EN55022 Class B
RoHS
OUTPUT SPECIFICATION
Voltage accuracy: see tolerance envelope curve
Line regulation:per 1%Vin Change: ±1.2%
LOAD REGULATION: from 10% to 100% Load: ±7.5 ~ ±10%
Cross Regulation (Dual Output): ±4%
Short Circuit Protection : continuous, auto recovery
Ripplenoise (20Mhz bandwidth): 75mV pk-pk
Temperature coefficient: ±0.02% °C
Capacitor load: see table
INPUT SPECIFICATIONS
Voltage Range: ±10%
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: Capacitors
Input Reflected Ripple Current: 15mA pk-pk
Start up time: 20ms typ.
(nominal Vin and constant resistance load)
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage (60sec): 1500 ~ 3000VDC
I/O Isolation Capacitance: 50pF typ.
I/O Isolation Resistance: 1000M Ohm
Switching Frequency: Variable 50kHz
Humidity: 95% rel H

Reliability Calculated MTBF : >3.6MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+105°C (see Derating Curve)
Maximum Case Temperature: 115°C
Storage Temperature : -55°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Non-conductive Black Plastic (UL94V-0 rated)
PIN MaterialSIP Case: C5191R-H Solder coated
Potting Material: Epoxy (UL94V-0 rated)
Weight Case- Sip: 2.4g
Dimmension SIP: 0.76 x 0.24 x 0.39“
ABSOLUTE MAXIMUM RATINGS (1)
Input Surge Voltage (100ms)/
5 V Models: 9VDC max
12V Models: 18VDC max
24V Models: 30VDC max
Soldering Temperature ⁽²⁾: 260°C max.
EMC SPECIFICATIONS
Radiated-/Conducted Emissions: EN55022 Class B
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (4)