RS2-0303S10AX Datasheet, PDF (1/8 Pages) RSG Electronic Components GmbH – DC/DC-Converter

1.0W unregulated
Single & Dual Output
DC/DC-Converter
• 7 Pin SIL/ 14Pin DIL Package
• 1000VDC Isolation
• Up to 6000VDC Isolation
• Low Ripple and Noise
• Efficiency up to 86%
• Operating Temperature Range:
-40° ~ +85°C
• Non Conductive Black Plastic Case
• EMI Complies with EN55022 Class B
RoHS
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
OUTPUT SPECIFICATION
ENVIRONMENTAL SPECIFICATION
Voltage accuracy: ±3%
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Line regulation:per 1%Vin Change: ±1.2%
Maximum Case Temperature: 100°C
LOAD REGULATION: from 20% to 100% load: ±10%
Storage Temperature : -40°C ~+125°C
Output 3.3V Model: ±20%
Cooling : Nature Convection
Ripplenoise (20Mhz bandwidth): 75mV pk-pk
PHYSICAL SPECIFICATIONS:
Temperature coefficient: ±0.02% °C
Case Material: Non-conductive Black Plastic (UL94V-0 rated)
Capacitor load: See table
PIN Material: Ø 0.5mm Alloy42 Solder-coated
INPUT SPECIFICATIONS
Potting Material: Epoxy (UL94V-0 rated)
Voltage Range: ±10%
Weight Case SIP: 2.3g
Max. Input Current: See table
Weight Case DIP: 2.6g
No-Load/Full-Load Input Current: See table
Dimension SIP: 0.76 x 0.24 x 0.39“
Input Filter: Capacitors
Dimension DIP: 0.80 x 0.40 x 0.27“
Input Reflected Ripple Current : 20mA pk-pk
ABSOLUTE MAXIMUM RATINGS (1)
GENERAL SPECIFICATIONS
Input Surge Voltage (100ms)/
Efficiency: See table
3.3V Models: 6VDC max
I/O Isolation Voltage (60sec): 1000 ~ 6000VDC
5 V Models: 7VDC max
I/O Isolation Capacitance: 60pF typ.
12V Models: 15VDC max
I/O Isolation Resistance: 1000M Ohm
15V Models: 18VDC max
Switching Frequency: Variable 80kHz
24V Models: 28VDC max
Humidity: 95% rel H
48V Models: 54VDC max
Reliability Calculated MTBF : >1.121MHrs
(MIL-HDBK-217 f)
Soldering Temperature ⁽²⁾: 260°C max.
EMC SPECIFICATIONS
Safety Standard: (designed to meet): IEC 60950-1
Radiated-/Conducted Emissions: EN55022 Class B
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may
adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless
otherwise specified.
4) The information and specification contained in this data sheet are believed
to be correct at time of publication. However RSG accepts no responsibility for consequences a
rising from printing errors or inaccuracies. Specifications are subject to change without notice.
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (7)