RRB-0503S03A5 Datasheet, PDF (1/3 Pages) RSG Electronic Components GmbH – DC/DC-Converter

3.5W Regulated Single
OSiuntgpleutOutput
DC/DC-Converter
• 24 Pin DIL Package
• Highest Reinforced Isolation
• 5000VAC Isolation
• Minimum internal creepage and clearance distance >8mm
• Short Circuit Protection
• ±20% Input Voltage Range
• Efficiency up to 80%
• Operating Temperature Range -40° ~ +85°C
• DIP 24 Plastic Case
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
OUTPUT SPECIFICATION
Voltage accuracy: ±2%
Line regulation:Single ±0.2% max.
LOAD REGULATION: from 10% to 100% Load: ±0.5% max.
Short Circuit Protection : Continuos (Automatic Recovery )
Ripple noise (20Mhz bandwidth): 85mV pk-pk max.
Temperature coefficient: ±0.02%/°C
Capacitor load: See table
Transient Recovery Time: 250us,typ.
INPUT SPECIFICATIONS
Voltage Range: ±20% max.
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: PI Type
Input Reflected Ripple Current : 35mA pk-pk typ.
OFF idle current: See table
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage (60sec): 5000VAC
I/O Isolation Capacitance: 50pF typ.
I/O Isolation Resistance: 1000M Ohm
Switching Frequency: 570kHz typ.
Humidity: 95% rel H
Reliability Calculated MTBF : > 1.00MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Maximum Case Temperature: 100°C
Storage Temperature : -40°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Non-conductive Black Plastic
(UL94V-0 rated)
PCB Creepage & Clearance
Distance 8mm min.
PIN Material: 0.5mmBrass Solder coated
Weight Case- Sip: 12.5g
Potting Material: Epoxy (UL94V-0 rated)
Dimmension DIP: 1.25“ x 0.8“ x 0.4“
ABSOLUTE MAXIMUM RATINGS (1)
Soldering Temperature: 260°C max.
EMC SPECIFICATIONS (2)
Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication.
However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] • Rsg-electronic.de
page 1 (3)