RR6-2403S05AX Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

5.0W 4:1 Regulated
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 24 Pin DIL Package
• Wide 4:1 Input Range
• 1500VDC Isolation
• Up to 3500VDC Isolation
• Continuous Short Circuit Protection
• Efficiency up to 83%
• Operating Temperature Range
-40° ~ +85°C
• Metal Case Standard , Optional Plastic Case
RoHS
OUTPUT SPECIFICATION
Voltage accuracy: ±1%
Line regulation:Single &Dual ±0.5% max.
LOAD REGULATION: ±0.5%
Output 3.3V Model: ±1.5%
Short Circuit Protection : Indefinite (Automatic Recovery)
Ripplenoise (20Mhz bandwidth): 60mV pk-pk
Temperature coefficient: ±0.02% °C
Capacitor load: See table
INPUT SPECIFICATIONS
Voltage Range: See table
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: PI Type
Input Reflected Ripple Current : 35mA pk-pk
GENERAL SPECIFICATIONS
Efficiency: See table typ.
I/O Isolation Voltage Metal Case (3 sec.): 1000VDC
I/O Isolation Voltage (3 sec.): 1500 ~ 3500VDC
I/O Isolation Capacitance: 470pF typ.
I/O Isolation Resistance: 1000M Ohm
Switching Frequency: 266kHz, typ.
Humidity: 95% rel H
Reliability Calculated MTBF : > 1.21MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Maximum Case Temperature: 100°C
Storage Temperature : -40°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Nickel-coated Copper
Base Material: Non-conductive Black Plastic (UL94V-0 rated)
PIN Material: Ø 0.5mmBrass Solder coated
Potting Material: Epoxy (UL94V-0 rated)
Weight Case-DIP: 13.5g (plastic), 17.0g ( Metal)
Dimmension DIP: 1.25“ x 0.8“ x 0.4“
ABSOLUTE MAXIMUM RATINGS (1)
Input Surge Voltage (100ms)/
24V Models: 40VDC max.
48V Models: 80VDC max.
Soldering Temperature: 260°C max. ⁽²⁾
EMC SPECIFICATIONS
Radiated-/Conducted Emissions: EN55022 Class A (see EMI Filter note)
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (4)