RR4-S10-D10 Datasheet, PDF (1/3 Pages) RSG Electronic Components GmbH – 10 Watt 2:1 regulated single & dual output

RR4-S10/D10
10 Watt 2:1 regulated
single & dual output
■ _{DIP24, wide 2:1 input range}
■ _{Full SMD technology}
■ _{1500 VDC isolation}
■ _{Continuous short circuit protection}
■ _{Efficiency up to 90%}
■ _{-40°C~85°C operation temperature range}
■ _{High power density: 10W in DIL-24 package}
OUTPUT SPECIFICATIONS
Output Voltage accuracy
± 1%
Maximum Output current
see table
Line regulation
± 0.5%
Load regulation (From 10% to 100% Load) (1)
(Output 3.3 V Model) (1)
Cross regulation (dual output) (2)
± 0.5%
± 0.7%
± 5.0%
Over current protection (of FL typ.)
Ripple & Noise (3)
Over voltage protection 2.5V output
150%
75 mV pk-pk
3.9V
(Zener diode clamp)
3.3V output 3.9V
5V output
6.2V
12V output
15V
15V output
18V
± 12V output ± 15V
± 15V output ± 18V
Short circuit protection Indefinite (hiccup)
(Automatic recovery)
Temperature coefficient
± 0.02%/°C
Capacitor load (4)
Transient recovery time (5)
See table
200us typ.
Transient response deviation (5)
± 3% max.
INPUT SPECIFICATIONS
Voltage range
Start up time (Nom. Vin and constant resistive load)
Input current No-Load (typ.)
Input current Full-Load (max.)
Input filter
Input reflected ripple current, typ. (6)
See table
20ms typ.
See table
See table
PI Type
20mA pk-pk
PHYSICAL SPECIFICATIONS
Case material
Nickel-coated copper
Pin material
Ø 0.5 mm brass solder-coated
Potting material
Epoxy (UL94V-0 rated)
Weight
17 g
Dimensions
1.25“x0.8“x0.4“
ENVIRONMENTAL SPECIFICATIONS
Operating temperature (See derating curve)
-40°C~ 85°C
Operating temperature (for 100% load)
-40°C~ 60°C
Maximum case temperature
100°C
Storage temperature
-40°C~125°C
Cooling
Nature convection
ABSOLUTE MAXIMUM RATINGS (7)
These are stress ratings. Exposure of devices to any of these
conditions may adversely affect long-term reliability.
Input voltage (100 mS)
12 modes
-0.7 ~ 25 VDC
24 modes
-0.7 ~ 50 VDC
48 modes
-0.7 ~ 100 VDC
Lead soldering temperature 260°C
(1.5 mm from case 10 sec.)
All specifications typical at Ta = 25°C, nominal input voltage and full load
unless otherwise specified.
The information and specifications contained in this data sheet are believed
to be correct at time of publication. However, we accept no responsibility
for consequences arising from printing errors or inaccuracies.
Subject to change without notice.
GENERAL SPECIFICATIONS
Efficiency
I/O isolation voltage Input / output (3 sec.)
Metal case / input & output
I/O isolation capacitance
I/O isolation resistance
Switching frequency
Humidity
Reliability calculated MTBF (MIL-HDBK-217F)
Safety standard (designed to meet)
See table
1500 VDC
1000 VDC
1000 pF typ.
1000 M Ohm
typ. 330 kHz
95% rel. H
> 1 Mhrs.
IEC 60950
The models listed are just for standard type. If you need a
special specification product, please contact our service.
Phone: [phone], mail to: [e-mail]
or use the forms on www.rsg-electronic.de („Kontakt“).
EMC CHARACTERISTICS
Radiated Emissions
EN55022
Conducted Emissions (8) EN55022
ESD
EN61000-4-2
RS
EN61000-4-3
EFT
EN61000-4-4
Surge (9)
CS
EN61000-4-5
EN61000-4-6
PFMF
EN61000-4-8
Class A
Class A
Perf. crit. B
Perf. crit. A
Perf. crit. B
Perf. crit. B
Perf. crit. A
Perf. crit. A
Page: 1/3
Last update: 12.02.09