RR1-0503S02AX Datasheet, PDF (1/4 Pages) RSG Electronic Components GmbH – DC/DC-Converter

2.0W Regulated
Single & Dual Output
DC/DC-Converter
we weneeerngeizrgeizeeleecltercotnroicnsic!s!
an acal group company
• 24 Pin DIL Package
• 1000VDC Isolation
• High Isolation up to 6000VDC (optional)
• Continuous Short Circuit Protection
• Efficiency up to 81%
• Operating Temperature Range
-40° ~ +85°C
• Plastic Case Standard , Optional
Metal Case
RoHS
OUTPUT SPECIFICATION
Voltage accuracy: ±2%
Line regulation: Single &Dual ±0.5% max.
Load regulation: Single ( 0% to 100% ) : ±0.5%,max.
Short Circuit Protection : Indefinite (Automatic Recovery)
Ripplenoise (20Mhz bandwidth): 75mV pk-pk
Temperature coefficient: ±0.02%°C
Capacitor load: See table
Transient Recovery Time: ±3% max.
Transient Response: 3.3V Output ±5% max.
INPUT SPECIFICATIONS
Voltage Range: ±10%
Max. Input Current: See table
No-Load/Full-Load Input Current: See table
Input Filter: PI Type
Input Reflected Ripple Current : 35mA pk-pk
GENERAL SPECIFICATIONS
Efficiency: See table
I/O Isolation Voltage Metal Case (3 sec.): 1000VDC
I/O Isolation Voltage (3 sec.): 1000 ~ 6000VDC
I/O Isolation Capacitance: 60pF typ.
I/O Isolation Resistance: 1000M Ohm
Switching Frequency: Single 40kHz typ., Dual 250KHz typ.
Humidity: 95% rel H
Reliability Calculated MTBF : > 1.00MHrs
(MIL-HDBK-217 f)
Safety Standard: (designed to meet): IEC 60950-1
ENVIRONMENTAL SPECIFICATION
Operating Temperature range: -40°C ~+85°C (see Derating Curve)
Maximum Case Temperature: 100°C
Storage Temperature : -40°C ~+125°C
Cooling : Nature Convection
PHYSICAL SPECIFICATIONS:
Case Material: Non-conductive Black Plastic (UL94V-0 rated)
Nickel-coated Copper
PIN Material: Ø 0.5mm Alloy42 Solder-coated,
Brass Solder coated
Potting Material: Epoxy (UL94V-0 rated)
Weight Case- Sip: 12.5 (plastic), 15.0g ( Metal)
Dimmension DIP: 1.25“ x 0.8“ x 0.4“
ABSOLUTE MAXIMUM RATINGS (1)
Input Surge Voltage (100ms)/
5 V Models: 7VDC max
12V Models: 15VDC max
24V Models: 28VDC max
Soldering Temperature: 260°C max. ⁽²⁾
EMC SPECIFICATIONS
Radiated-/Conducted Emissions: EN55022 Class A (see EMI Filter note)
ESD: IEC 61000-4-2 Perf.Criteria A
RS: IEC 61000-4-3 Perf.Criteria A
EFT: IEC 61000-4-4 Perf.Criteria A
SURGE: IEC 61000-4-5 Perf.Criteria A
CS: IEC 61000-4-6 Perf.Criteria A
PFMF IEC 61000-4-8 Perf.Criteria A
1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability.
2) (1.5mm from case 10sec Max.)
3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified.
4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no
responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice.
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •[phone] •rsg-electronic.de
page 1 (4)