PDL03W Datasheet, PDF (1/3 Pages) RSG Electronic Components GmbH – 3 WATTS DC-DC CONVERTER

PDL03W SERIES
3 WATTS DC-DC CONVERTER
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 3 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 700mA
• SIP PACKAGE, 0.86 x 0.36x 0.44 INCH
• HIGH EFFICIENCY UP TO 82%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• SWITCHING FREQENCY (100kHz, min)
• LOW RIPPLE & NOISE
• UL94-V0 CASE POTTING MATERIALS
• INPUT TO OUTPUT ISOLATION: 1600VDC
• CONTINUOUS SHORT CIRCUIT PROTECTION
• EXTERNAL ON/OFF CONTROL
• CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
• SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU
OPTIONS
3000VDC ISOLATION
DESCRIPTION
The PDL03W series offer 3 watts of output power from a 0.86 x 0.36 x 0.44 inch package
without derating to 71ºC. The PDL03W series have 4:1 ultra wide input voltage of 4.5~18
9~36 and 18~75VDC and features 1600VDC of isolation, short-circuit protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
3 Watts, max.
Voltage accuracy
± 1%
Minimum load
0%
Line regulation LL to HL at Full Load
Single
No Load to Full load
± 0.2%
± 1%
Load regulation
5% load to 100% load
± 0.5%
Cross regulation
(Dual)
Dual
No Load to Full Load
Asymmetrical load 25%/100% FL
± 1%
±5%
Ripple and noise 20MHz bandwidth
Temperature coefficient
See table
±0.02% / ºC, max.
Transient response recovery time 25% load step change
250us
INPUT SPECIFICATIONS
12VDC nominal input
Input voltage range
24VDC nominal input
48VDC nominal input
4.5 ~ 18VDC
9 ~ 36VDC
18 ~ 75VDC
Input filter
Capacitor type
12VDC input
Input surge voltage
24VDC input
48VDC input
Input reflected ripple
current(Note 6)
12VDC input
24VDC input
48VDC input
Start up time
Nominal input and
constant resistive load
DC-DC ON
Remote ON/OFF
DC-DC OFF
36VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
25mAp-p
10mAp-p
8mAp-p
Power up
30ms
Remote ON/OFF
30ms
Open or high impedance
Ω Control pin applied current
2 ~ 4mA max(via 1k )
Remote off state input current Nominal input
2.5mA, max.
Application circuit
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
500VDC
Standard
Suffix “H”
1600VDC, min. 1minute
3000VDC, min. 1minute
10⁹ohms, min.
Standard
Suffix “H”
200pF, max.
40pF, max.
Full load to minimum load
100kHz, min.
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +71ºC (without derating)
+71ºC ~ +100ºC (with derating)
Storage temperature range
-55ºC ~ +125ºC
Thermal shock
MIL-STD-810F
Design meet safety standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Non-conductive black plastic
Base material
None
Potting material
Dimensions
Weight
MTBF(Note 1)
Bellcore TR-NWT-000332
MIL-HDBK-217F
Silicon (UL94-V0)
0.86 X 0.36 X 0.44 Inch
(21.8 X 9.2 X 11.1 mm)
4.8g (0.17oz)
3.963 x 10⁶ hrs
1.707 x 10⁶ hrs
Vibration
Relative humidity
EMC CHARACTERISTICS
EMI(Note6)
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
Fast transient(Note 7) EN61000-4-4
Surge (Note 7)
EN61000-4-5
± Air 8kV
± Contact 6kV
10 V/m
± 2kV
± 1kV
MIL-STD-810F
5% to 95% RH
Class A, Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2013/5/3