PBA75F Datasheet, PDF (1/2 Pages) RSG Electronic Components GmbH – Unit type

PB
R
Unit type
PBA75F
Ordering information
PB
1
A 75 F -5 -O
2
3
4
5
6
Recommended Noise Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
1Series name
2Single output
3Output wattage
4Universal input
5Output voltage
6Optional
C :with Coating
G :Low leakage current
(0.15mA max / ACIN 240V)
E :Low leakage current
and EMI class A
(0.5mA max / ACIN 240V)
T :Vertical terminal block
J :Connector type
R :with Remote ON/OFF
N :with Cover
(Only 24V UL508 is acquired)
N1 :with DIN rail
V :Output voltage setting
potentiometer external-
ly
Cover is optional
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
PBA75F-3R3
49.5
3.3V 15A
PBA75F-5
75
5V 15A
PBA75F-9
75.6
9V 8.4A
PBA75F-12
75.6
12V 6.3A
PBA75F-15
75
15V 5A
PBA75F-24
76.8
24V 3.2A
PBA75F-36
75.6
36V 2.1A
PBA75F-48
76.8
48V 1.6A
SPECIFICATIONS
MODEL
PBA75F-3R3 PBA75F-5
PBA75F-9
PBA75F-12 PBA75F-15 PBA75F-24 PBA75F-36
VOLTAGE[V]
AC85 - 264 1f or DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *4)
CURRENT[A]
ACIN 100V 0.7typ
ACIN 200V 0.4typ
1.0typ
0.5typ
FREQUENCY[Hz]
50/60 (47 - 63)
INPUT
EFFICIENCY[%]
ACIN 100V 77typ
ACIN 200V 78typ
81typ
83typ
80typ
82typ
81typ
83typ
82typ
84typ
83typ
85typ
84typ
86typ
POWER FACTOR(Io=100%)
ACIN 100V
ACIN 200V
0.98typ
0.87typ
0.99typ
0.93typ
INRUSH CURRENT[A]
ACIN 100V
ACIN 200V
15typ (Io=100%) (At cold start)
30typ (Io=100%) (At cold start)
LEAKAGE CURRENT[mA]
0.4/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN)
VOLTAGE[V]
3.3
5
9
12
15
24
36
CURRENT[A]
15
15
8.4
6.3
5
3.2
2.1
LINE REGULATION[mV]
20max
20max
36max
48max
60max
96max
144max
LOAD REGULATION[mV]
40max
40max
100max
100max
120max
150max
240max
RIPPLE[mVp-p]
0 to +50C*1 80max
-10 - 0C*1 140max
80max
140max
120max
160max
120max
160max
120max
160max
120max
160max
150max
200max
OUTPUT
RIPPLE NOISE[mVp-p]
0 to +50C*1
-10 - 0C*1
120max
160max
120max
160max
150max
180max
150max
180max
150max
180max
150max
180max
250max
300max
TEMPERATURE REGULATION[mV] ^{0 to +50C 50max}
-10 to +50C 60max
50max
60max
90max
120max
120max
150max
150max
180max
240max
290max
360max
450max
DRIFT[mV]
*2 20max
20max
36max
48max
60max
96max
144max
START-UP TIME[ms]
350typ(ACIN 100V, Io=100%)
HOLD-UP TIME[ms]
20typ (ACIN 100V, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.63 4.00 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 28.8 - 39.6
OUTPUT VOLTAGE SETTING[V] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44
OVERCURRENT PROTECTION
PROTECTION _{OVERVOLTAGE PROTECTION[V]}
CIRCUIT AND
OTHERS
OPERATING INDICATION
REMOTE ON/OFF
Works over 105% of rated current and recovers automatically
4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0
LED (Green)
Optional (Required external power source)
20.0 - 25.0
30.0 - 37.0
43.0 - 50.0
INPUT-OUTPUT -RC
*3 AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)
ISOLATION INPUT-FG
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)
OUTPUT-RC-FG
*3 AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature)
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max
ENVIRONMENT ^{STORAGE TEMP.,HUMID.AND ALTITUDE}
VIBRATION
-20 to +75C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max
10 - 55Hz, 19.6m/s² (2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s² (20G), 11ms, once each X, Y and Z axis
AGENCY APPROVALS (At only AC input)
SAFETY AND
NOISE
REGULATIONS
CONDUCTED NOISE
CE MARKING
HARMONIC ATTENUATOR
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN
Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Low Voltage Directive, EMC Directive
Complies with IEC61000-3-2
OTHERS
CASE SIZE/WEIGHT
COOLING METHOD
32X82X135mm (without terminal block) (WXHXD) / 350g max (without cover)
Convection
PBA75F-48
84typ
86typ
48
1.6
192max
240max
150max
200max
250max
300max
480max
600max
192max
39.0 - 53.0
48.00 - 49.92
58.0 - 65.0
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN
* Parallel operation with other model is not possible.
:RM101).
* Derating is required when operated with cover.
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
* A sound may occur from power supply at peak loading.
*3 Applicable when Remote ON/OFF(optional) is added. RC is insulated with input, output and
FG.
*4 Derating is required.
Distribution:
RSG Electronic Components GmbH ^■ Sprendlinger Landstr. 115 ^■ D-63069 Offenbach/Germany
A-12
Tel. [phone] ^■ Fax [phone] ^■ [e-mail] ^■ www.rsg-electronic.de
Änderungen vorbehalten / subject to change without notice