PAA50F Datasheet, PDF (1/2 Pages) RSG Electronic Components GmbH – Unit type

PAA
R
Unit type
PAA50F
Ordering information
PAA 50 F -5 -O
1
2
3
4
5
Recommended Noise Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
1Series name
2Output wattage
3Universal input
4Output voltage
5Optional
C :with Coating
G :Low leakage current
J :Connector type
N :with Cover
R :with Remote ON/OFF
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
PAA50F-3
30
3V 10A
PAA50F-5
50
5V 10A
PAA50F-12
51.6
12V 4.3A
PAA50F-15
52.5
15V 3.5A
PAA50F-24
52.8
24V 2.2A
PAA50F-48
52.8
48V 1.1A
SPECIFICATIONS
MODEL
PAA50F-3
PAA50F-5
PAA50F-12
PAA50F-15
PAA50F-24
PAA50F-48
VOLTAGE[V]
AC85 - 264 1f
CURRENT[A]
ACIN 100V 0.5typ
ACIN 200V 0.25typ
0.8typ
0.4typ
FREQUENCY[Hz]
50/60 (47 - 63)
INPUT
EFFICIENCY[%]
67typ
74typ
77typ
78typ
80typ
80typ
POWER FACTOR ACIN 100V 0.95typ (Io=100%)
ACIN 100V 15typ (Io=100%)
INRUSH CURRENT[A] _{ACIN 200V 15typ (Io=100%)}
LEAKAGE CURRENT[mA] 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN)
VOLTAGE[V]
3
5
12
15
24
48
CURRENT[A]
10
10
4.3
3.5
2.2
1.1
LINE REGULATION[mV] 20max
20max
48max
60max
96max
192max
LOAD REGULATION[mV] 40max
40max
100max
120max
150max
240max
RIPPLE[mVp-p]
0 to +50C*1 80max
-10 - 0C*1 140max
80max
140max
120max
160max
120max
160max
120max
160max
150max
200max
OUTPUT
RIPPLE NOISE[mVp-p] ^{0 to +50C*1 120max}
-10 - 0C*1 160max
120max
160max
150max
180max
150max
180max
150max
180max
250max
300max
TEMPERATURE REGULATION[mV] ^{0 to +50C 50max}
-10 to +50C 60max
50max
60max
120max
150max
150max
180max
240max
290max
480max
600max
DRIFT[mV]
*2 20max
20max
48max
60max
96max
192max
START-UP TIME[ms]
500max (ACIN 85V, Io=100%)
HOLD-UP TIME[ms]
10typ (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%) 100typ (ACIN 200V, Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6
t10%
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
PROTECTION _{OVERVOLTAGE PROTECTION 4.00 - 5.25V}
CIRCUIT AND
OTHERS ^{OPERATING INDICATION}
LED (Green)
Works at 115 - 140% of rating
REMOTE ON/OFF
Optional (Refer to Instruction Manual)
INPUT-OUTPUT -RC
*3 AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M_W min (At Room Temperature)
INPUT-FG
ISOLATION
OUTPUT-RC-FG
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
*3 AC500V 1minute, Cutoff current = 100mA, DC500V 50M_W min (At Room Temperature)
OUTPUT-RC
*3 AC100V 1minute, Cutoff current = 100mA, DC100V 10M_W min (At Room Temperature)
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +65C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
VIBRATION
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s² (2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s² (20G), 11ms, once each X, Y and Z axis
SAFETY AND ^{AGENCY APPROVALS}
NOISE
CONDUCTED NOISE
REGULATIONS _{HARMONIC ATTENUATOR}
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
Complies with IEC61000-3-2
OTHERS
CASE SIZE/WEIGHT
COOLING METHOD
37X85X159mm (without terminal block) (WXHXD) /400g max (without cover)
Convection
*1 According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101).
*2 Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*3 Applicable when Remote ON/OFF(optional) is added.
* Derating is required when operated with case cover. Distribution:
RSG Electronic Components GmbH ^■ Sprendlinger Landstr. 115 ^■ D-63069 Offenbach/Germany
A-48
Tel. [phone] ^■ Fax [phone] ^■ [e-mail] ^■ www.rsg-electronic.de
Änderungen vorbehalten / subject to change without notice