LEA150F Datasheet, PDF (1/2 Pages) RSG Electronic Components GmbH – Rugged PCB type

Rugged PCB type
LEA150F
R
Ordering information
LEA 150 F -5 -O
1
2
3
4
5
Recommended Noise Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
1Series name
2Output wattage
3Universal input
4Output voltage
5Optional
C :with Coating
G :Low leakage current
J2:Mini terminal block
R :with Remote ON/OFF
S :with Chassis
SN :with Chassis & cover
Y :with Potentiometer
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H LEA150F-30 LEA150F-48
99
150
153
150
150
153
151.2
151.2
150
153.6
*5 3.3V 30A 5V 30A 9V 17A 12V 12.5A 15V 10A 18V 8.5A 24V 6.3A 24V 6.3(7.5)A 30V 5A 48V 3.2A
SPECIFICATIONS
MODEL
LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H
LEA
VOLTAGE[V]
CURRENT[A]
AC85 - 264 1f or DC120 - 370
ACIN 100V 1.4
2.0typ
ACIN 200V 0.7
1.0typ
FREQUENCY[Hz]
50/60 (47 - 63) or DC
INPUT
EFFICIENCY[%]
ACIN 100V 71typ
ACIN 200V 74typ
76typ
79typ
79typ
82typ
78typ
81typ
80typ
83typ
81typ
84typ
81typ
84typ
81typ
84typ
POWER FACTOR
ACIN 100V 0.98typ
ACIN 200V 0.91typ
0.99typ
0.94typ
INRUSH CURRENT[A]
ACIN 100V
ACIN 200V
15typ (Io=100%) (At cold start) (Ta=25C)
30typ (Io=100%) (At cold start) (Ta=25C)
LEAKAGE CURRENT[mA]
0.75max (60Hz, According to IEC60950 and DEN-AN)
VOLTAGE[V]
3.3
5
9
12
15
18
24
24
CURRENT[A]
*1 30
30
17
12.5
10
8.5
6.3
6.3 (Peak 7.5)
LINE REGULATION[mV]
20max
20max
36max
48max
60max
72max
96max
96max
LOAD REGULATION[mV]
40max
40max
100max 100max 120max 120max 150max 150max
RIPPLE[mVp-p]
0 to +50C*2 80max
-10 - 0C*2 140max
80max
140max
120max
160max
120max
160max
120max
160max
120max
160max
120max
160max
120max
160max
OUTPUT
RIPPLE NOISE[mVp-p]
0 to +50C*2
-10 - 0C*2
120max
160max
120max
160max
150max
180max
150max
180max
150max
180max
150max
180max
150max
180max
150max
180max
TEMPERATURE REGULATION[mV] ^{0 to +50C 50max}
-10 to +50C 60max
50max
60max
90max
120max
120max
150max
150max
180max
180max
200max
240max
290max
240max
290max
DRIFT[mV]
*3 20max
20max
36max
48max
60max
72max
96max
96max
START-UP TIME[ms]
500max (ACIN 100V, Io=100%)
HOLD-UP TIME[ms]
20typ (Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 Fixed ("Y"which can be adjusted the output is available as optional:t10%)
OUTPUT VOLTAGE SETTING[V] 3.25 - 3.35 4.9 - 5.3 8.6 - 9.4 11.5 - 12.5 14.4 - 15.6 17.3 - 18.7 23.0 - 25.0 23.0 - 25.0
OVERCURRENT PROTECTION Works over 105% of rating (works over 105% of peak current at option -H) and recovers automatically
PROTECTION ^{OVERVOLTAGE PROTECTION}
CIRCUIT AND OPERATING INDICATION
OTHERS
REMOTE SENSING
4.00 - 5.25V Works at 115 - 140% of rating
Not provided
Not provided
REMOTE ON/OFF
Option (Refer to Instruction Manual)
INPUT-OUTPUT -RC
*4 AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
ISOLATION
INPUT-FG
OUTPUT-RC-FG
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
*4 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)
OUTPUT-RC
*4 AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature)
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT _VIBRATION
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s² (2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s² (20G), 11ms, once each X, Y and Z axis
SAFETY AND ^{AGENCY APPROVALS}
NOISE
CONDUCTED NOISE
REGULATIONS _{HARMONIC ATTENUATOR}
UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input)
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
Complies with IEC61000-3-2
OTHERS
CASE SIZE/WEIGHT
COOLING METHOD
75X40X222mm (WXHXD) /500g max (without chassis and cover)
Convection
LEA150F-30
84typ
87typ
30
5
120max
180max
120max
160max
150max
180max
300max
360max
120max
28.5 - 31.5
LEA150F-48
84typ
87typ
48
3.2
192max
300max
150max
200max
350max
400max
480max
600max
192max
46.0 - 50.0
*1 Peak load for 10 sec. or less is acceptable if the total wattage is less than the rated wattage.
*2 This is the value that measured on measuring board with capacitor of 22mF within 150mm
from output terminal.
Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN:
RM101).
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C,
with the input voltage held constant at the rated input/output.
*4 Applicable when remote control (optional) is added.
*5 ( ): peak current.
* Parallel operation with other model is not possible.
* Derating is required when operated with chassis and cover.
E-24