SM-1322-L Datasheet, PDF (1/1 Pages) Reed Relays and Electronics – Sub-miniature Reed Switch

SM-1322 Sub-miniature Reed Switch
Form A, Center Contact, Release AT Configurable
All dimensions in mm
This form A reed switch is built with a 2.25 mm diameter glass having a higher wall thickness for better
glass to metal seals, and is a good solution for general purpose, high volume applications with a little shock
and vibration, such as toys. The centre contact also makes it suitable for coil applications. The three
differential ranges available cover a wide range of release specific applications. A specially plated contact
for 230 VAC line voltage switching is also available. This reed switch is Lead (Pb) free and RoHS compliant.
Formations Available
Cropped
SMD
Welded
Soldered
Goal post
L Formed
Applications
This reed switch is suitable for use in the following applications and many others: copiers and scanners,
coffee machines, flow sensing, inclination sensors, lake current measurement, power switches in explosive
areas, ferrous metal detection sensors, gear speed and direction sensors...
Electrical
Sub code
Operate Range
Release Range
Contact Rating (max)
Switching Current (max)
Carry Current (max)
Switching Voltage (max)
Switching Voltage (max)
Breakdown Voltage (min)
Initial Contact Resistance (max)
Insulation Resistance (min)
Capacitance (min)
AT
AT
W/ VA
A
A
V_DC
V_AC
V_DC
m

pF
L
10 – 40
4 – 20
10.0
0.5
1.5
180
130
200
100
10 ¹¹
0.2
M
10 - 40
6 – 25
10.0
0.5
1.5
180
130
200
120
10 ¹¹
0.2
H
10 – 40
7.5 – 30
10.0
0.5
1.5
180
130
200
150
10 ¹¹
0.2
Miscellaneous
Operate Time (max)
Bounce Time (max)
Release Time (max)
Resonance Frequency
Operating Frequency
Operating Temperature
Test Coil
Lead out plating
Shock Resistance
Vibration (10-2000Hz)
Ordering Code
ms
0.5
SM-1322-(Sub Code)-(Start Operate AT)-
ms
0.15
(Finish Operate AT)
ms
0.15
Hz
>2000
Example SM-1322-M-10-14
Hz
500
Denotes 10-14 Operate AT band, with a
°C
-40 to +200
minimum Release AT of 6.
717 102 002
Sn (Pb free)
Other Configurations Available
g
g
50
20
Dynamic contact resistance limit, Higher insulation
resistance, Special release limits, Gold plates leads
Please refer to our reed switch usage notes
Due to continual improvement, specifications are subject to change without notice
www.reed-sensor.com
10 May 2008
Reed Relays and Electronics India Limited  [e-mail]  Tel [phone]