LU7-039-600 Datasheet, PDF (2/2 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Cable assembly

Technical Data Sheet
Cable assembly
RPC-3.50 Plug / Jack– RTK 162 - VA Armour
LU7-039-XXX
Electrical data
Impedance
Frequency
Return loss¹
Insertion loss¹
RF-leakage
50 Ω
DC to 26.5 GHz
≥ 26 dB, DC to 4 GHz
≥ 20 dB, 4 GHz to 26.5 GHz
see table “Available variants”
≥ 100 dB up to 1 GHz
1 _{Return Loss and Insertion Loss includes the measurement adaptor}
Stability data
(acc. VDI/VDE/DGQ/DKD 2622 part 19)
Insertion loss stability:
After 90° bending
≤ 0.03 dB, DC to 4 GHz
≤ 0.05 dB, 4 GHz to 26.5 GHz
≤ 1.0°, DC to 4 GHz
≤ 3.0°, 4 GHz to 26.5 GHz
Straight after 3x90° bending
≤ 0.5°, DC to 4 GHz
≤ 1.5°, 4 GHz to 26.5 GHz
Return loss stability:
After 90° bending
≥ 48 dB, DC to 4 GHz
≥ 40 dB, 4 GHz to 26.5 GHz
Individual testing and
documentation:
Measurement plot with all 4 S-Parameters (S11; S22; S21; S12) and the care and handling instruction are
included with the cable assembly. Auxiliary adaptors used are mentioned in the commentary field.
Mechanical data
Minimum bend radius:
60 mm
Environmental data
Operating temperature range²
Rated temperature range of use³
Storage temperature range
RoHS
+20 °C to +26 °C
0 °C to +50 °C
-40 °C to +85 °C
compliant
2 Temperature range over which these specification are valid.
3 This range is underneath and above the operating temperature range, within the cable assembly is fully functional
and could be used without damage.
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Martin Moder
Date
09.01.17
Approved
Herbert Babinger
Date
26.01.147
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Rev. Engineering change number
h00
17-s039
Tel. : [phone]
Email : [e-mail]
Name
M.Ruf
Date
26.01.17
Page
2/2