74K12L-000S3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Open Circuit JACK

Technical Data Sheet
F 75 Ω
Open Circuit
Jack
74K12L-000S3
Electrical data
Frequency range
Return loss
Error from nominal phase¹
DC to 4 GHz
 0.10 dB, DC to 4 GHz
 1.5°, DC to 4 GHz
1 _{The nominal phase is defined by the Offset Delay, the Offset Loss and the Fringing Capacitances.}
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Accommodate male contact diameter
Gauge
 500
6.78 Nm
2.00 Nm
0.76 mm to 0.86 mm
0.00 mm to 0.10 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Fringing Capacitances²
75 
53.371 ps
16.00 mm
1.30 GΩ/s
0.0080 dB/ GHz
2 _{Fringing Capacitances are determined individually for each open circuit and are documented in a Calibration Certificate.}
Environmental data
Operating temperature range³
Rated temperature range of use⁴
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
3 _{Temperature range over which these specification are valid.}
4 _{This range is underneath and above the operating temperature range, within the open circuit is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3