74K121-K20S3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Calibration Adaptor

Technical Data Sheet
F 75 Ω
Calibration Adaptor
Jack/Jack
74K121-K20S3
Electrical data
Frequency range
Return loss
DC to 4 GHz
 32 dB, DC to 4 GHz
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Accommodate male contact diameter
Gauge
 500
6.78 Nm
2.00 Nm
0.76 mm to 0.86 mm
0.00 mm to 0.10 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
75 
108.740 ps
32.60 mm
1.30 GΩ/s
0.0082 dB/ GHz
Environmental data
Operating temperature range¹
Rated temperature range of use²
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
1 _{Temperature range over which these specification are valid.}
2 _{This range is underneath and above the operating temperature range, within the calibration adaptor is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3